Anker A7908 Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Altavoces Anker A7908. Anker A7908 5 páginas. Portable bluetooth speaker

2. Activate your device's Bluetooth function and search for the device.

3. Once the Bluetooth speaker has been detected, select the product name "Anker MP141" to connect.

(For devices with Bluetooth versions below 3.0, press "Yes" to confirm pairing. Enter a passkey or PIN

code "0000" (4 zeros), then press the "Yes" or "OK" key to finish pairing.)

4. When the Bluetooth speaker and your device are successfully paired, the Status Indicator will go on

and remain on while connected.

Note: The speaker will automatically connect to the last-connected device once Bluetooth function is

enabled. When pairing with an additional device, disable the Bluetooth function on the previous device

and shut off the speaker, or simply delete the pairing record. Then, repeat the pairing process.

How to Use

Slide the switch to the "on" or "off" position to turn the speaker on or off.

First, make sure your device is connected to the speaker successfully. Open your music software to play

your music from the speaker. Press the "Play/Pause" button to pause music.

Press the "Volume Up" or "Volume Down" button to increase or decrease the volume.

Voice dialing

Please ensure your mobile phone supports voice dialing and voice tag recognition to use this feature.

Press the "Play/Pause" button for 2 seconds, then give your voice command. Your device should then

repeat the name to confirm before calling. (On iPhone, this will activate Siri.)

Answering a call

Press the "Play/Pause" button to answer a call, or answer directly from the phone.

Ending a call

Press the "Play/Pause" button to end a call, or end directly from the phone.

Rejecting an incoming call

Press the "Play/Pause" button for 2 seconds to reject an incoming call.

Microphone

Use the microphone directly on the speaker to talk after answering a call. The distance between your

mouth and the speaker should not exceed 2ft/60cm.

Deleting pairing records

When the speaker is in standby mode, press the "Volume Down" and "Volume Up" buttons for 2 seconds

to delete pairing records.