Droplet SP2 Manual - Página 12

Navegue en línea o descargue pdf Manual para Instrumentos de medida Droplet SP2. Droplet SP2 13 páginas. Beam-scan camera and software

Imprimir página

Troubleshooting

Problem

No response when > is clicked

in Visulux software.

Beam plot and surface picture

appear truncated at the top of

the profile.

No response when > is

clicked in Visulux software.

Appendix A: Changes to Manual

Revision Date

Revision #

4-8-10

1/10/17

1 2

Possible Cause

Camera is not responding.

Camera is saturated and cannot

respond properly.

Camera is not selected as input

device.

Summary

Updated assembly drawing

General updates

Solutions

Check the serial number of camera and

open the Visulux software folder to check

for the presence of the proper key. There

may be more than one key present in the

software folder, and the key ID may be a

bit hard to decipher but check the camera

serial number and it should be close to

one of the keys present. The master CD of

the Visulux software will contain the

proper key file.

Reduce laser power or reduce exposure

time.

On the toolbar, go to View (if Input

Control is not checked, check the box to

bring up this window, which will be titled

Camera). Under Select a video board, the

camera should appear here and be

highlighted. If it is not, highlight this.

Section

Appendix B

All Sections

DOC-0175 Rev D