Anker Nebula Prizm II Pro Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Proyector Anker Nebula Prizm II Pro. Anker Nebula Prizm II Pro 14 páginas.

Getting Started

1. Placement

Place Nebula Prizm II Pro on a flat and stable surface, and

squarely point it to face the projection surface. For best

results, the projection surface should be white and flat.

The distance between this projector and the projection

surface must be a minimum of 39.4 inches (1 meter) and a

maximum of 118 inches (3 meters).

Nebula Prizm II Pro comes with a flip stand. To use the flip

stand:

① Press the

The flip stand pops out.

D2241_EN_Manual_60X110mm_20181121_V01.indd 8-9

button.

② After use, press the

button again, and

simultaneously press in the stand to push it back into the

slot.

Note: You can also install your projector in the following

ways: behind the projection surface, hanging from the

ceiling in front of the projection surface, or hanging from

the ceiling behind the projection surface. Make sure you

select the correct Projector Mode option in the menu

settings.

2. Select Projection Distance

The distance between Nebula Prizm II Pro and the

projection surface determines the approximate size of the

image. Use the table below to determine approximately

how far to place Nebula Prizm II Pro from the projection

surface based on the size of the projected image.

Screen size (length × width)

50 inches (110 cm × 62 cm)

55 inches (122 cm × 68 cm)

80 inches (177 cm × 100 cm)

100 inches (221 cm × 124 cm )

120 inches (266 cm × 150 cm )

Projection distance

(m)

59.1 in (1.5 m)

64.2 in (1.63 m)

91.7 in (2.33 m)

113.4 in (2.88 m)

135 in (3.43 m)

2018\12\21 星期五 16:37:37