DROPSA VIP4ToolsPro Manual de uso y mantenimiento - Página 11
Navegue en línea o descargue pdf Manual de uso y mantenimiento para Sistemas de lubricación DROPSA VIP4ToolsPro. DROPSA VIP4ToolsPro 12 páginas.
Imprimir página11.3 VIP4ToolsPro 3 LITERS. (2+2+6
12. HANDLING AND TRANSPORTATION
Prior to dispatch VIP4ToolsPro lubrication panels are carefully packed in a cardboard carton. During
transportation and storage maintain the equipment the right way up as indicated on the carton.
On receipt, check that the packaging is not damaged and store the equipment in a dry place.
13. PRECAUTIONS IN USE
It is necessary to carefully read the warnings and the risks involved in using the lubrication panel. The
operator must understand the functioning of the unit by studying the user's manual.
Electric currents
No intervention must be attempted on the equipment without first having disconnected the electrical power
supply (electric level) and ensuring that it cannot be reconnected during the intervention.
All installed equipment, electrical, electronic, tank and base structure, must be connected to the ground
line. (see paragraph 6.7).
Flammability
The oil employed in the lubrication circuit is not normally flammable. It is nonetheless indispensable to
take every precaution against the oil coming into contact with very hot parts or open flames.
Pressure
Prior to any intervention on the equipment ensure that pressure is released from all branches of the
lubrication circuit. Failure to do this could result in oil being discharged under pressure where connections
or components are disassembled (see paragraph 6.6).
Noise
The VIP4ToolsPro lubrication panel does not emit excessive noise, remaining below 70 dB(A).
Before carrying out the replacement of the mini-pumps, empty the tank of lubricant.
Lubrication Points for external limit switch)
AIR OUTLET FOR LIMIT
PNEUMATIC SWITCH
(push in tube Ø8)
SOLENOID
CABLE GLAND
PER EV
SOLENOID VALVE
24 V DC
AIR INLET FROM PNEUMATIC
SWITCH
(push in tube Ø8)
INTAKE AIR
Push-in Ø8 tubing
AIR/OIL OUTLET
Ø6/3 (coaxial) – Ø4 (straight)
AIR CHARACTERISTICS
ELECTRIC LEVEL
FILLER
PLUG
PUMP STROKE
ADJUSTMENT
AIR FLOW
REGULATOR
11