anko LD-K1047 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Electrodomésticos de cocina anko LD-K1047. anko LD-K1047 9 páginas. Cordless tea maker

1. Fill the tea maker with water and add vinegar in a ratio of 1:3 (1 part vinegar / 3 parts water).

Note: Make the mixture in a separate container and then pour into the tea maker up to the

MIN (0.5L) mark only.

2. Bring to a boil (see Boiling water), then pour away.

3. Allow the tea maker to cool down and then refill it fresh water. Boil the water and then pour it

away.



To avoid scale deposits, descale the tea maker at regular intervals (after about every

15th use) as described in the section "Descaling".

Method of Use

The appliance can brew green tea, white tea, oolong tea and black tea. Each function of

brewing tea includes keep warm function.

When the appliance is plugged, all lights will flash three times and enter into standby status. The

button lights will be ON for 30s. If there is no function key is selected during this period, all lights

will go OFF and the appliance will automatically shut down.

When the appliance is ON, if you want to switch to a certain function, first cancel the current

function first by touching the chosen key, and then press the other function key of your

preference.

（1）Brew Tea

1. Remove the jug from power base, open the lid from the jug and remove the tea filter from

the jug.

2. Fill the jug with fresh water to desired level.

The level should not be less than MIN 0.5L.

IMPORTANT! Do not exceed the MAX water level mark to prevent hot water from

ejecting from the jug.

3. Place desired amount of tea in the filter. Place the tea filter into the jug.

4. Close the lip according to the symbol indicated on the lip.

5. Place the jug on the power base.

6. Insert the plug into a mains power outlet socket, which must be earthed. You will hear two

beeps

7. Press the Tea type button (6), select the type of tea (5) you want.

8. Press the Start/Cancel button (8) to heat the water to preset water temperature, During

this period, the indicator lights will flash.

9. When the preset water temperature is reached, the indicator light will turn steady ON and

the brew time begins. After the preset brew time, you will hear five beeps and the

indicator light will flash, which means that the brew time is finished and the tea is ready.

To stop the brew time cycle at any time, press the Start/Cancel button (8)

Do not open the lid from the jug while water is boiling. Be aware of boiling water and steam

From the kettle.