anko WK8256N Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Hervidor anko WK8256N. anko WK8256N 6 páginas.

– bed and breakfast type environments.

· Do not operate the kettle if damaged.

· Avoid spillage on the electrical connector.

CAUTION! Heating element and surface are subject to

residual heat after use.

·Use the kettle according to these instructions, any misuse

may cause electric shock or other hazards.

·This appliance is not intended to heat liquids other than

water.

· When cleaning refer to section < Cleaning >.

· Before you connect the kettle to mains power, make sure

that the voltage indicated on the rating plate, located on

the bottom of the water kettle matches the mains voltage in

your home. If it does not, do not use the kettle.

· The kettle will switch OFF automatically when the water

has boiled. If you want to stop the heating process before

the kettle automatically switches off, press the ON/OFF

switch up.

· After the kettle has switched OFF automatically (or has

been switched OFF manually) it may need time to cool

down and reset. After 15-20 seconds, the kettle can be

switched ON again.

· Always fill the kettle with cold water before switching ON.

· The kettle is designed to disconnect the live electrical

supply from the heating element during abnormal

operating conditions. If the water kettle is accidentally

switched ON without water, it will activate the dry boil

protection circuit in the kettle.

· If the kettle ever boils dry, the power indicator will go out.

Allow 15 minutes to cool down before refilling with cold

water. The in-build safety cutout circuit in the kettle will

automatically reset during this time.

· Place the kettle on a stable flat surface.

CAUTION! Do not operate the kettle on an inclined

plane. Do not operate the kettle unless the element is

fully immersed. Do not move while the kettle is

switched ON.

· Do not use this appliance outdoors.

· Ensure that the kettle is switched OFF before removing it

from the base.

· Do not remove the kettle from its base during operation.

· Never immerse the kettle or cord in water or any other

liquid. Do not allow liquid to penetrate the electrical parts of

this kettle.

· Prevent children from pulling on the mains power cord or

knocking the kettle over.