anko WK8516AE Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Hervidor anko WK8516AE. anko WK8516AE 7 páginas.

Before first use

Before first use, it is recommended to operate the

kettle for 2 or 3 times following the instructions

below, this will remove any dust or residue

remaining from the manufacturing process.

· Remove the kettle from the base before filling.

· To fill the kettle, open the cover by pulling the lid

handle upwards, then fill water to the desired level

(Min.0. 6L - Max.1.7L). Close the lid by pressing it

down until it clicks into place.

· Plug the power supply cord into mains power.

Press the ON/OFF switch, and the power indicator

should light up.

· When the water has boiled, the kettle will switch

OFF automatically. You can stop the boiling

process at any time by lifting the On/Off switch. The

power indicator will go out.

Cleaning

· First read the instructions in the section titled

"IMPORTANT INSTRUCTIONS".

· Always disconnect the kettle from mains power

outlet before cleaning.

· Before cleaning, make sure the kettle is cold

enough.

· Empty the kettle and clean the exterior surface of

the kettle with a clean, damp cloth to preserve its

original highly polished finish. Dry and polish with a

soft cloth.

· Do not use abrasive cleansers or scouring agents

of any kind inside or on the exterior of the kettle.

·Only use the dry cloth to wipe the base of the

kettle.