anko BL3403A Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Licuadora anko BL3403A. anko BL3403A 7 páginas. Portable usb blender
NOTE: If the juice cup is empty, the blender will operate for 5 seconds and stop. Blue indication
light will flash 5 times.
CLEANING AND STORAGE
Make sure the blade has come to a complete stop before cleaning.
Do not use abrasive cleaners or corrosive liquid (such as gasoline, acetone) to clean the product.
The main unit can be wiped with a damp soft cloth. Do not rinse, soak or spray water or other liquids
to avoid damage to the appliance (main unit).
Rinse the inside of the juice cup and the parts in contact with food with clean water and wipe dry.
IMPORTANT! Blades are sharp. Handle with care when cleaning.
Fast Cleaning: Add appropriate amount of water to the juice cup and install it on the main unit.
Double-click the button switch to start and operate for 5 to 10 seconds. Discard the water.
When storing, ensure the product is clean and dry, and placed in a dry, ventilated area away from
direct sunlight.
This product contains a Li-ion battery. When not in use, it the appliance should be stored in a clean,
dry, ventilated room with an ambient temperature range of -5℃ to + 35℃ and a relative humidity
of 25% to 75%.
When not in use, store the cup on the main unit.
TROUBLESHOOTING
Problem
The appliance doesn't
work when the power
switch is pressed.
Red light turns ON
during stirring.
Red light flashes and
the appliance doesn't
work.
TECHNICAL SPECIFICATION
Voltage: 5.0Vd.c. 1A
Juice Cup Max. Capacity: 300mL
Possible cause
Safety protection switch on the base
is not activated.
Insufficient voltage.
Too large or too much ingredients
preventing blade from turning.
The battery temperature is too high,
power protection circuit activated.
Solution
Make sure the cup is screw into place
until you hear a slightly "click". This
indicate the juice cup is screwed-in
correctly on to the base.
Charge the appliance.
Cut the fruit to smaller size or reduce
the quantity.
Allow the appliance to cool down for
30 minutes before using it again.
5