anko BL9005-CB Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Licuadora anko BL9005-CB. anko BL9005-CB 7 páginas.

9. Then assemble the jar lid on the jar. Take the jar with you throughout the day to

stay hydrated. When you need a drink, you just need to open the spout lid to drink the

contents from the jar.

Note: After you have consumed your blended beverage, wash out the jar and reuse it

throughout the day for water or other cold liquids.

CAUTION! The blender is intended for blending fluids, e.g. dairy products,

smoothies, fruit juices, mixed drinks, shakes etc. Do not blend hot liquid.

Avoid touching the sharp blades. If the blades get stuck, unplug the appliance

first and remove the ingredients that are blocking the blades with a spatula.

CLEANING AND MAINTENANCE

The Auto Clean feature can clean the blender and blade assembly easily, rapidly in

complete safety.

-Pour a little warm soapy water into the jar and mix for a few seconds in the blender

by plugging into a mains power outlet.

-Remove the jar by turning it anti-clockwise and rinse under warm running water.

-Wipe the outer surface of Motor Unit with a damp cloth.

Warning: Do not use abrasive cleaners. For electrical safety, never immerse the

Motor Unit in water for cleaning.

All parts except for the motor unit are dishwash-safe. You can also wash the parts,

except the motor unit, in warm, soapy water.

-Dry all parts and reassemble blade assembly to opening end of the jar and then place

in the motor unit. Snap the jar lid on the other end of the jar.

IMPORTANT! If you incur any issue with the appliance during use, never attempt to

disassemble the Motor Unit by yourself, there are no user serviceable parts inside.

Contact a qualified electrical person for examination and repair.

STORAGE

. Unplug and clean the unit.

2. Store in original box or in a clean, dry place.

3. Never store the blender while it is hot or while connected to mains power.

4. Never wrap the cord tightly around the appliance.

IMPORTANT! Never place any stress on the power cord, especially where the

cord enters the unit, as this could cause the cord to fray and break.