Drucker Diagnostics 614B Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Equipos de laboratorio Drucker Diagnostics 614B. Drucker Diagnostics 614B 16 páginas.

NITIAL

ETUP

If any problems are found during the initial setup procedure, refer to the

troubleshooting section on page 9. For further assistance, contact

Drucker Diagnostics at 814-692-7661.

1. Plug the centrifuge in to an approved electrical outlet. For

electrical safety, the unit must always be properly grounded.

2. Turn the latch counter–clockwise and open the lid.

3. Spin the rotor by hand; check for free and level rotation.

4. Close the lid. Rotate the lid knob clockwise to its complete stop

position.

5. Turn the centrifuge on by turning the timer to 10 minutes.

6. Listen to the centrifuge. A smooth whirring sound should be

heard.

After the centrifuge has passed this procedure it is ready for operation.

Drucker Diagnostics +1-814-692-7661 - [email protected] Page | 4

ROCEDURE