Annlov AC 01 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Cámaras de salpicadero Annlov AC 01. Annlov AC 01 10 páginas.

Imprimir página
Basic operation
Installation diagram
Installation
1. Insert a memory card to camera
2.
Attach camera to the window with adhesive mount
Before the device can
be
used in a car,it is essential to
first
install
a properly attached window with adhesive mount
Make
sure
that you place the camera in a safe.appropriate location where
it
will
not
obstruct the driver's view.
3.
Connect the USB charger to the car's 12V DC Outlet/
Cigarette lighter to start recording.Do not remove card during
camera recording.
4. When not in use,to disconnect USB charger and slide camera
off its adhesive mount to take away the camera with
you.
-5-
Insert/remove Micro SD card
1.
Format the card as
FA
T32 by computer before use;
You can use Gui Format for formatting 64Gb card as FA
T32.
2.
Insert one micro SD card (Class 10 grade,16GB or above) into
camera and push until it locks into
place.
3. To remove the micro SD card
first
stop recording or disconnect
camera from power and then press the end of the micro SD
card until it clicks out from slot.
Take Recording
Camera will start recording automatically when plugged
into the car cigarette lighter socket.no need extra
operation.
The LED indicator light flashes during video recording.If
camera WIFI connection is off.the led flashes red during
video recording;if camera WIFI connection is on,the led
flashes green during video recording
.
Lock video clip
L
Short press "lock"button from the
side of
the camera to lode video
clips manually
2. Video clips will be Locked automatically when G-sensor triggered
by some shock
Wi-Fi Switch On/Off
1. Long press
"lock"
button for 5 seconds to switch Wi-fi function
On/Off.
2. Its led light indicates red when Wi-Fi Off;Its led light indicates
Green when Wi-Fi On.
-6-