Drummond MTL20 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de prueba Drummond MTL20. Drummond MTL20 5 páginas. Test lamps
También para Drummond MTL20: Manual de instrucciones (5 páginas), Manual de instrucciones (20 páginas), Manual de instrucciones (5 páginas)

Imprimir página

4. MAINTENANCE

4.1 Probe Replacement

If the test prods become damaged they should be replaced.

Replacement prods are available as spare items:

Straight prod (DRUMTL2104)

L-shaped prod (DRUMTL2105)

Contact your local distributor or contact Martindale Electric on

01923 441717 or email [email protected].

4.2 Calibration

To maintain the integrity of indication, Martindale Electric

recommends that it is returned at least once a year to an approved

Calibration Laboratory for recalibration and certification.

Martindale Electric is pleased to offer you this service.

Please contact our Service Department for details.

Email: [email protected]

4.3 Cleaning

Warning

To reduce the risk of surface leakage, this instrument must be kept

in a clean condition.

Warning

Prior to cleaning, ensure that the instrument is disconnected from

any voltage source.

If the instrument is dirty it should be cleaned thoroughly using a

moist cloth. Particular attention should be paid to all areas forward

of the finger guards.

5. WARRANTY AND LIMITATION OF LIABILITY

This Martindale product is warranted to be free from defects in

material and workmanship under normal use and service. The

warranty period is 2 years and begins on the date of receipt by the

end user. This warranty extends only to the original buyer or end-

user customer, and does not apply to fuses, disposable batteries,

test leads or to any product which, in Martindale's opinion, has

been misused, altered, neglected, contaminated, or damaged by

accident or abnormal conditions of operation, handling or storage.

Martindale authorised resellers shall extend this warranty on new

and unused products to end-user customers only but have no

authority to extend a greater or different warranty on behalf of

Martindale.

Martindale's warranty obligation is limited, at Martindale's option,

to refund of the purchase price, free of charge repair, or

replacement of a defective product which is returned to Martindale

within the warranty period.

This warranty is the buyer's sole and exclusive remedy and is in

lieu of all other warranties, expressed or implied, including but not

limited to any implied warranty of merchantability or fitness for a

particular purpose. Martindale shall not be liable for any special,

indirect, incidental or consequential damages or losses, including

loss of data, arising from any cause or theory.

Since some jurisdictions do not allow limitation of the term of an

implied warranty, or exclusion or limitation of incidental or

consequential damages, the limitations and exclusions of this

warranty may not apply to every buyer. If any part of any provision

of this warranty is held invalid or unenforceable by a court or other

decision-maker of competent jurisdiction, such holding will not

Tel: 01923 650660

Do not use solvents, detergents or ionic cleaners, since these can

be conductive. After cleaning, any wet residue should be shaken

vigorously from the instrument. It should be dried thoroughly before

storage or further use.

4.4 Repair & Service

There are no serviceable parts in this unit. The MTL10 and MTL20

are sealed units and must not be opened for any reason.

4.5 Storage Conditions

The instrument should be kept in cool, dry conditions and not

subjected to shock, scratching or other damage, prolonged direct

harsh sunlight, extremes of temperature and in such a manner as

to preserve the working life of the unit. It is strongly advised that

the unit is not kept in a tool box where other tools may damage it.

affect the validity or enforceability of any other provision or other

part of that provision.

Nothing in this statement reduces your statutory rights.