Anodyne Therapy Freedom 300 Información de seguridad e instrucciones para la solicitud - Página 9
Navegue en línea o descargue pdf Información de seguridad e instrucciones para la solicitud para Equipamiento médico Anodyne Therapy Freedom 300. Anodyne Therapy Freedom 300 20 páginas.
También para Anodyne Therapy Freedom 300: Manual (20 páginas)
Imprimir página
- 1. Table of Contents
- 2. General Warnings and Precautions
- 3. Purpose of Device (Indications for Use)
- 4. Device and Parts Description
- 5. Environmental Conditions Affecting Use
- 6. Set up Instructions
- 7. Operating Instructions
- 8. Treatment Frequency
- 9. Cleaning
- 10. Maintenance
- 11. Storage
- 12. Troubleshooting
- 13. Summary
- 14. Warranty and Return Policy
- 15. Index
i
nsTruCTions
OPERATING YOUR FREEDOM 300
Warning: The Freedom 300 emits heat and may cause burns! If
either the Calf Treatment Pad or Foot Treatment Pad feels too hot,
immediately remove both Treatment Pads and stop treatment
by depressing the On/Off switch on the Control Unit to the OFF
position. Call 1-800-521-6664 prior to using again.
While the system is turned OFF, for your safety,
STEP 1:
visually inspect the system to make sure that none of the
electrical cords are frayed and that there are no exposed
wires.
Put on the Calf Treatment Pad - detailed in
STEP 2:
Steps 2a - 2g below.
Step 2a: Loosen the Upper and Lower Attachment Straps on
Calf Treatment Pad so you can slide the Attachment Straps
over your foot and onto your bare calf.
Step 2b: Pull the Velcro ends of the Top Attachment Straps
away from the sides of the Leg Attachment Strap.
Note: For optimal results the side
of Calf Treatment Pad with 4 diode
heating clusters must be facing
towards the back of the knee,
while the side with 2 diode heating
clusters should be facing towards
the heel.
f
u
or
se
!
9
Top
Bottom