DryBell Vibe Machine V-2 Manual de opciones - Página 5

Navegue en línea o descargue pdf Manual de opciones para Pedal de música DryBell Vibe Machine V-2. DryBell Vibe Machine V-2 18 páginas.
También para DryBell Vibe Machine V-2: Manual del usuario (2 páginas)

Imprimir página

DryBell Vibe Machine V-2 Manual de opciones

DryBell Guitar Effects

5 PEDAL+ JACK MODE

An external expression pedal or footswitch can be connected to the expression PEDAL+ jack to control speed or other

secondary features. PEDAL+ jack features 6 different modes: 3 for expression pedal (E1, E2 and E3) and 3 for external

footswitch (S4, S5 and S6). These are modes used to define the type of hardware that is plugged into the PEDAL+ jack, and

its function. As mentioned before, these are set and forget modes.

PEDAL+

TYPE OF EXTERNAL

MODE

HARDWARE

Expression pedal

External footswitch

If you prefer the simplicity of a footswitch instead of an expression pedal, you can use our new product the DryBell

Footswitch F1-L.

5.1

HOW TO SET THE PEDAL+ MODE?

So, if you look at the silkscreen around the speed knob on the V-2 pedal

S4, S5 and S6 marked around it. To choose a mode using the PEDAL+ jack you need to:

Set the speed pot to the wanted position (Settings E1, E2, E3, S4, S5 and S6 around the pot) depending on the

PEDAL+ mode/function that you want to activate. We recommend you to align the white mark on the speed

knob with your chosen setting mark.

Using the jack from your expression pedal or footswitch, plug it in and out of the expression pedal socket 3 times

within 3 seconds.

The chosen mode is activated when the system LED lights up orange (it stays orange for 2 seconds). After that 2

seconds the system LED starts blinking green again, activation of your chosen mode is now complete. Once this procedure

is over the pedal continues to work in your selected PEDAL+ mode (of course only if you have something plugged into the

PEDAL+ jack). If nothing is plugged into the PEDAL+ jack the SPEED pot will control speed normally.

After unplugging the power supply the V-2 keeps the PEDAL+ mode you have stored in its internal memory, so there is

no need to repeat the procedure next time the pedal is used. The PEDAL+ connector needs to be plugged in and out 3

times only when you plan to switch to a different PEDAL+ mode or change hardware (for example using a footswitch

instead of an expression pedal or vice versa). So, this is a one time procedure for most users (for example, the user selects

their preferred mode from the PEDAL+ jack options and then mounts the pedal on their pedalboard).

Resetting the pedal to default factory function will set PEDAL+ mode to E1. The following sections will explain what

each of the PEDAL+ modes is used for and how they work.

5.2

PEDAL+ MODE

E1 mode for expression pedals is for those who don't need the Tap Tempo feature, and who want to use both

expression pedal and the pedal's speed pot to control the speed. Using the speed pot automatically deactivates the

expression pedal's position/speed setting and vice versa. This is useful in case you want to play a song with a fixed speed

setting. You can use the pedal's speed pot to set the desired speed easily. Also, the speed pot can be used to

engage/disengage the CANCEL function, or to set a desired Leslie ramp delay.



Turning the SPEED pot changes the speed of pulsations (full speed range from MIN to MAX)

✓ Moving the expression pedal automatically changes the speed, but at the same time the speed pot position

defines the Leslie ramp delay. If you don't want to use Leslie ramp function, just set the speed pot on MIN



Swivelling the speed pot back and forth engages/disengages the CANCEL function when the expression pedal's

heel is down (4 quick ¼ turns of the Speed knob, left-right swivels). When Cancel function is engaged (by

swivelling speed pot) and active (heel down by default) the system LED will be red. See CANCEL types and options

in SETUP MENU



No tap tempo

BACK TO CONTENTS

www.drybell.com

Table 1. PEDAL+ modes and their functions

FUNCTION

Exp. pedal OR speed pot changes speed; Cancel; Leslie ramp; NO Tap tempo

Only exp. pedal changes speed; Cancel; Leslie ramp; Tap tempo

Exp. pedal OR speed pot changes speed; Cancel; Leslie ramp; Tap tempo

Cancel function only

Cancel function and Tap tempo function

FAST/SLOW function with Leslie ramp delay; Two speed switch

(Table 2, Page

9).

DryBell

Vibe Machine V-2, Options User's manual, rev.1.4. 09/2018

(Figure

1), you can see the settings E1, E2, E3,

Doc. No. DM0958/ Page 5