Dryflow BulletDri Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Secadora Dryflow BulletDri. Dryflow BulletDri 12 páginas.
Imprimir página
11
TURN ON CIRCUIT BREAKER
HEPA CLEAN & REPLACEMENT
The service life of a HEPA filter depends on the environment in which the dryer is installed and frequency
of use. High traffic washrooms or high usage will require more frequent inspection and replacement of
the HEPA filter. The HEPA filter should be inspected at least four times per year in washrooms with light to
moderate traffic and normal environments.
In environments with excessive, dust and debris or in washrooms with high traffic, inspection of the HEPA
filter is recommended on a monthly basis. When visual inspection of the HEPA filter shows excessive
buildup of lint, dust and debris, the filter should be replaced.
Examining and changing a HEPA filter regularly keeps hand dryers working efficiently.
Operating a hand dryer with an excessively dirty or clogged filter can damage your machine.
The HEPA filter cannot be cleaned and re-used. Do not clean the HEPA filter or allow it to come into
contact with water.
The hand dryer is also workable with Coarse Particulate Filter. The dryer has a coarse particulate air filter
to prevent lint and debris build up that can damage the motor and heating element. Routine
replacement or cleaning of the air filter is needed to maintain the dryer in good operating condition.
With light to moderate wash room traffic, replacing or cleaning the air filter once a year is
recommended.
If the wash room traffic is high, the air filter should be replaced or cleaned every 6 months.
OPERATION
No-touch operation.
There is a blue LED light to guide user to the air flow.
Shake excess water from hands.
Place hands under the outlet to start operation.
Rub hands lightly and rapidly under the nozzle outlet.
Stops automatically after hands are removed or if maximum time is reached.
12
HEPA FILTER REPLACEMENT [Selection]
HEPA FILTER