Daikin BYCQ140E2GFW1B Manual de instalación - Página 5
Navegue en línea o descargue pdf Manual de instalación para Limpiador de aire Daikin BYCQ140E2GFW1B. Daikin BYCQ140E2GFW1B 16 páginas. Decoration panel provided with filter auto cleaning function self cleaning decoration panel
Imprimir página
(1) Turn the two fixing knobs of the dust box.
Fixing knob
Dust box
Fixing knob
(The front side of the panel is shown for ease of explanation.)
(2) Remove the dust box from the panel while paying attention not
to cut the fall prevention cord.
Dust box
Fall prevention cord
(3) Remove the fall prevention cord for the dust box from the
clasp bracket of the panel.
Remove the fall
prevention cord from
the clasp bracket.
Panel
Clasp
5. Preparations for indoor unit
WARNING
Check that the indoor and outdoor units are turned power off
before conducting wiring work.
Otherwise, an electric shock may be received.
CAUTION
• Conduct the following work after installing the indoor unit.
• Install the indoor unit according to the installation manual
provided with the indoor unit.
BYCQ140E2GW1 + BYCQ140E2GFW1 + BYCQ140E2GFW1B
Self cleaning decoration panel
4P558847-1B 2019.02
2
1
Dust box
Fall prevention cord
5-1
Attaching spacer (accessory (1))
(1) Remove the bypass hole closing cap.
2
1
1
Indoor unit
2
Remove the bypass hole closing cap
(2) Peel off the release paper of the double-stick tape on the
backside of the spacer (accessory (1)).
(3) Attach the spacer (accessory (1)) on the air bypass hole.
Check that the air bypass hole is not blocked after the spacer
is attached.
1
2
3
4
4
1
Air bypass hole
2
Pasted to align with the air bypass hole
3
Align the corners
4
Spacer (accessory (1))
5-2
Attaching harness (accessory (4))
(1) Remove the EL. COMPO. BOX lid from the indoor unit.
Screws
(2 points)
Loosen the screws (in two points) and slide the EL. COMPO. BOX
lid in the direction of the arrow to unhook the lid from the claws.
2
Claws
EL. COMPO. BOX lid
Installation manual
4