Daikin BYCQ140E2GFW1B Manual de instalación - Página 9
Navegue en línea o descargue pdf Manual de instalación para Limpiador de aire Daikin BYCQ140E2GFW1B. Daikin BYCQ140E2GFW1B 16 páginas. Decoration panel provided with filter auto cleaning function self cleaning decoration panel
Imprimir página
7. Attaching suction grille and
decoration corner covers
The suction grill can be rotated and attached in two directions,
either one of which is selectable.
If a number of units are installed, adjust the directions of the suction
grilles if necessary. Make directional changes as well at the request
of the customer.
7-1
Attaching suction grille
* Select either the hook (A) or (B), and hook the claws of the
suction grille.
Note
The suction grille may be damaged if the wrong hooking side is
selected.
7-2
Hook (A)
(1) Set the suction grille to an angle of approximately 45° and put
the hooks (in three points) onto the panel.
Panel
Suction
grille
Suction grille mounting angle
(2) As shown in the illustration, hook the fall prevention cords for
the suction grille to the corner clasps (on two corners).
Change the directions of
the fall prevention cords.
Suction grille
Fall prevention cord
Clasp
BYCQ140E2GW1 + BYCQ140E2GFW1 + BYCQ140E2GFW1B
Self cleaning decoration panel
4P558847-1B 2019.02
Display on
SUCTION GRILLE HOOKING SIDE
Panel
Suction
grille
Bend the
Clasp
clasp inward.
Fall prevention cord
(3) Connect the flexible hose (accessory (2)) onto the panel side.
(The flexible hose (accessory (2)) has no directionality constraint.)
Flexible hose
(accessory (2))
Flexible hose junction
on the panel side
Hooks
(2 points)
Note
Check that the claws are engaged securely. Otherwise, a dust
collection failure may result.
(4) Press fit the flexible hose connected in (3) into the panel.
(Pay attention so that the hose will not be caught by the
suction grille closed.)
Note
Be sure not to break the flexible hose when press fitting the
flexible hose.
Flexible
hose
Press fit the
flexible hose
along the shape
of the corner.
(5) Connect the opposite end of the flexible hose connected in (3)
onto the suction grille side.
* Rotate the flexible hose joint on the suction grille side
according to the mounting direction of the suction grille as
shown in the illustration.
Flexible hose joint on
the suction grille side
Note
Check that the claws are engaged securely. Otherwise, a dust
collection failure may result.
Flexible hose junction
on the panel side
Fit the claws into the
hooks (in two points)
securely.
To suction grille
Flexible hose
joint on the
suction grille side
Flexible hose
Connect the
hose securely.
Installation manual
8