Daikin Altherma 3 R F Manual de referencia del usuario - Página 14
Navegue en línea o descargue pdf Manual de referencia del usuario para Climatizadores Daikin Altherma 3 R F. Daikin Altherma 3 R F 20 páginas.
También para Daikin Altherma 3 R F: Manual de instrucciones (12 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones (16 páginas), Manual de instalación (12 páginas)
Imprimir página
4 Operation
5 Repeat this action for all other weekdays.
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
To program the schedule for Saturday and copy it to Sunday:
1 Select Saturday.
2 Select Edit.
3 Use the left dial to select an entry and edit the entry
with the right dial.
Sat
0
12
24
8:00
21°C
23:00
18°C
--:--
--
4 Confirm the changes.
5 Select Saturday.
6 Select Copy.
7 Select Sunday.
8 Select Paste.
Result:
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
To rename the schedule:
1 Select the name of the current schedule.
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
2 Select Rename.
Delete
Rename
Select
3 (optional) To delete the current schedule name,
browse through the character list until ← is
displayed, then press to remove the previous
character. Repeat for each character of the schedule
name.
4 To name the current schedule, browse through the
character list and confirm the selected character.
The schedule name can contain up to 15 characters.
5 Confirm the new name.
INFORMATION
Not all schedules can be renamed.
Usage example: You work in a 3-shift system
If you work in a 3-shift system, you can do the following:
User reference guide
14
—
C
C
1 Program 3 room temperature schedules in heating mode and
give them appropriate names. Example: EarlyShift, DayShift
and LateShift
2 Select the schedule that you currently want to use.
4.8
Weather-dependent operation
In space heating control, the leaving water temperature setpoint
mode can be:
▪ Fixed
▪ Weather
dependent (the leaving water temperature is
determined automatically depending on the outdoor temperature)
The domestic hot water temperature can also be set by a weather-
dependent curve.
You can change the setpoint mode for the:
▪ Main zone [2.4]
▪ Additional zone (if available) [3.4]
▪ Tank [5.B]
To modify the parameters for the weather-dependent curve ([2.5] for
the main zone; [3.5] for the additional zone; [5.C] for the domestic
hot water), see below.
4.8.1
Detailed screen with weather-dependent
curve
When weather-dependent (WD) operation is active the desired
leaving water or tank temperature is determined automatically
depending on the averaged outdoor temperature. When the outdoor
temperature is lower the leaving water or tank temperature will need
to be higher as the water pipes will be colder and vice versa.
2-points WD curve
The weather-dependent curve is defined by two setpoints:
▪ Setpoint (X1, Y2)
▪ Setpoint (X2, Y1)
Weather-dependent curve:
Y2
Y1
X1
X2
Possible actions on this screen
Go through the temperatures.
Change the temperature.
Go to the next temperature.
Confirm changes and proceed.
EHVZ04+08S18+23DA + EHVZ04+08S18+23DJ
a
Daikin Altherma 3 R F
4P495251-1B – 2019.06