AbsolutAire UC-3 Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Termostato AbsolutAire UC-3. AbsolutAire UC-3 13 páginas.
También para AbsolutAire UC-3: Manual del usuario (14 páginas)
Imprimir página
To turn the unit on or off, press the "up arrow" to access the Fan Command.
Use the "up arrow" to select the desired option, then press the center
button "menu" to return to the main display.
To change set points such as temperature or building pressure, press the
"menu" button until you see "SET POINTS" in the top right of the screen.
Press the "up arrow" to enter this sub-menu. Your first choice will be
"mode". Use the up arrow to select "heat or vent" (unless the unit has air
conditioning, in which case the choices will be "heat/cool/air"). When you
have made your choice, press the "menu" button to move to the next menu
item, which will be the Occupied Heat Set Point. Again, use the "up/down"
arrow buttons to make your entry and press "menu" when finished.
Continue scrolling through the Set Points sub-menu until all of your desired
settings are completed. When scrolling the menu and you see the option
"BACK" in the top right, pressing the "up arrow" will take you to the previous
menu.
Scrolling through the "STATUS" sub-menu will allow you to view the status
of all of the unit sensors, damper positions, and burner operation. This is
useful for checking unit operation or outdoor conditions.
The "ALARMS" menu will only be displayed if there is a system alarm, as
indicated by the blinking alarm bell on the display. When an alarm is
present, scrolling through this sub-menu will allow you to view the alarm(s)
in "plain English" enumerated text. This is useful for diagnosing the unit in
the event of a problem.
Sensor Alarm Display
081721