AbsolutAire UC-3 Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Sistema de seguridad AbsolutAire UC-3. AbsolutAire UC-3 13 páginas.
También para AbsolutAire UC-3: Manual del usuario (14 páginas)
Imprimir página
The "SCHEDULE" will be described later. This is a 7-day occupancy
schedule used for the purpose of temperature or operation changes during
unoccupied times.
The "CONFIG" menu is where the primary operating set points for the unit
are set such as the minimum and maximum allowable discharge
temperatures, as well as other items. Again, use the "menu" button to scroll
through the sub-menu and the "up/down" buttons to edit your selection.
Schedule
To set the 7-day occupancy schedule, press the "menu" button until you
see "SCHEDULE" in the top right of the display. Press the "up arrow" to
enter the schedule. Your first option will be "DAY". Use the "up/down" arrow
to select the day for this schedule. Once you have selected the day, press
"menu" to go to the next field which will be the Occupied Hour. This is the
hour (I.E. in 24 hour format, 5pm is hour 17) of the day the system will
become Occupied. Use the "up/down" arrows to select the appropriate
hour, then press "menu" to move to the Occupied Minute. Again, use the
"up/down" arrows to select the appropriate minute then press "menu" to
move to the Unoccupied Hour and Unoccupied Minute settings. When the
occupied and unoccupied hours and minutes have been set for that day,
return to "DAY" and use the "up/down" arrows to move to the next day. If
you do not want to set a schedule for a certain day, simply leave the hours
and minutes at a value of zero (0) and that day will be ignored by the
schedule. After you have completed setting the schedule, return to the main
display by using the "BACK" options or by not pressing any buttons for 15
seconds.
Once the schedule is set, the unit will follow the occupied and unoccupied
temperature set points for each day.
081721