DS Services of America pure water dispenser 200k Series Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Dispensador de agua DS Services of America pure water dispenser 200k Series. DS Services of America pure water dispenser 200k Series 6 páginas. Diy: how to clean your water dispenser
También para DS Services of America pure water dispenser 200k Series: Cómo limpiar (2 páginas)

Imprimir página

10. Now, plug dispenser into the power supply using a GFCI outlet.

11. Install drip tray and cover.

12. Prime water system. Place a cup under the dispenser faucet. To dispense hot water, depress the child safety lock (located

below the left hot faucet handle) simultaneously until water flows continuously. Next, depress the right cold faucet handle to

make sure there is a continuous flow of water.

NOTE:

It may take up to 1 minute to prime the hot tank, and up to 3 minutes to prime the cold tank.

13. Dispense water.

CLEANING AND SANITIZING

Your water dispenser exterior should be thoroughly cleaned at least twice a year, and your CrystalFlo water cartridge replaced every

12 months. If you do not have a replacement cartridge handy, you can order one

Before you start cleaning, wash your hands thoroughly with soap and water for at least 20 seconds.

TIP:

The best time to replace your water cartridge and clean your dispenser is when the

existing water bottle is empty.

WHAT YOU'LL NEED:

• CrystalFlo replacement cartridge

• 70% rubbing alcohol or disinfecting wipes

• Clean cloth or soft brush

• Disposable non-latex gloves

WARNING:

Always use caution when handling hot water.

Fig 1

Turn off the hot tank heater switch

on the back of the dispenser and

unplug your unit (Fig 1). Let the unit

stand for one hour before cleaning

to allow the hot tank to cool.

Pull CrystalFlo water cartridge upward to remove (Fig 4). Do not squeeze

the water reservoir as water could leak out.

TIP:

Have a bucket nearby to dispose of the used

CrystalFlo cartridge, which will contain water.

• Bucket

• Heat-resistant container to fit under spigots

• Towels to absorb any water spills

Fig 2

Place a glass or other container

below the water faucets to catch

any drips (Fig 2).

here

and it will be shipped directly to you.

Fig 3

Wearing gloves, press the cover lock

on the top rim of the cooler and pull

up to open (Fig 3).

Fig 4