Airthings View Series Manual de inicio rápido - Página 8
Navegue en línea o descargue pdf Manual de inicio rápido para Monitor Airthings View Series. Airthings View Series 16 páginas. Indoor air quality and radon monitors
También para Airthings View Series: Manual de inicio rápido (16 páginas), Manual del usuario (11 páginas), Manual del usuario (5 páginas), Manual del usuario (11 páginas)
Imprimir página
Configurable Display
The display can be configured to show the sensor values you care most about. Configuration is done in the
Airthings Dashboard or App. The display will update up to every 2.5 minutes, depending on the sensor
sample interval and the sensors shown on the display. It will sometimes flicker completely to refresh itself.
This is normal and does not mean your device is operating incorrectly.
Note: The calm tech, e-paper display does not require power to show an image. If your View device suddenly loses power, for example if the
USB connector is removed and there are no batteries in the compartment, then the display will simply keep displaying whatever image it had
when loss of power occurred. The display will update as normal when power is restored to the product.
Using your View as a hub for other Airthings devices
When powered over USB, and connected to WiFi, your View device will act as a SmartLink hub for other
supported Airthings devices (Wave Mini, Wave Plus, Wave Radon 2nd gen). This is a great way to keep all
your Airthings devices continuously connected and accessible. Use the Airthings App to select which
Airthings devices to link to your View.
Reset button
A short press of the reset button (for about half a second) will toggle through various useful information on
the display. Note that a short press will not reset the device.
A long press of the reset button will reset your device completely, reverting it back to its factory state. This
removes any locally stored personal data, such as your WiFi password. It will not remove the device from
your online account. When you hold the reset button, a countdown will show up on the display letting you