DS18 SQ82A Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Subwoofer DS18 SQ82A. DS18 SQ82A 12 páginas. 8" active subwoofer with aluminum enclosure

Imprimir página
INTRUCTIONS FOR FUNCTIONS AND CONTROLS
1
INTRUCTIONS FOR FUNCTIONS AND CONTROLS
1
BOOST
REFUERZO
REMOTE
REMOTO
0 dB 12
REMOTE
REMOTO
GND
REM
TIERRA
REMOTO
GND
REM
TIERRA
REMOTO
7
1. REMOTE CONTROLLER OUTLET
To be connected with the remote controller, which helps to boost the gain.
7
Please turn the knob of volume to be maximum before using the remote.
1. REMOTE CONTROLLER OUTLET
2. BOOST: The boost ranges from 0dB to 12dB.
To be connected with the remote controller, which helps to boost the gain.
3. PHASE: Phase adjusting switch, the phase ranges from 0°-180° degrees.
Please turn the knob of volume to be maximum before using the remote.
4. LPF: Low pass frequency adjusting knob, the frequency ranges from 30Hz to 150Hz.
2. BOOST: The boost ranges from 0dB to 12dB.
5. LEVEL: Knob for volume adjustment.
3. PHASE: Phase adjusting switch, the phase ranges from 0°-180° degrees.
6. LOW LEVEL INPUTS
4. LPF: Low pass frequency adjusting knob, the frequency ranges from 30Hz to 150Hz.
Low level inputs are the recommended way to introduce the audio signal to the subwoofer if RCA
5. LEVEL: Knob for volume adjustment.
outputs are present on your head unit or other signal source (such as a sound processor).
6. LOW LEVEL INPUTS
7. +12V :Anode of power connection terminals. Connect to the anode of car battery.
Low level inputs are the recommended way to introduce the audio signal to the subwoofer if RCA
REM: Terminal to be connected with Remote cable, wich comes from the source and which
outputs are present on your head unit or other signal source (such as a sound processor).
controls the amplifier switching on. Applied voltage must be between 10 and 15 VDC.
7. +12V :Anode of power connection terminals. Connect to the anode of car battery.
GND: Ground terminal. Connect to the car chassis. Keep the lenght of the ground cable to a
REM: Terminal to be connected with Remote cable, wich comes from the source and which
minimum.
controls the amplifier switching on. Applied voltage must be between 10 and 15 VDC.
8. FUSE: Standard automatic fuse, you must use the same power fuse if you need to change it.
GND: Ground terminal. Connect to the car chassis. Keep the lenght of the ground cable to a
9. PROTECTION / POWER INDICATOR
minimum.
When the amplifier is operating correctly the LED will show as green.
8. FUSE: Standard automatic fuse, you must use the same power fuse if you need to change it.
When the amplifier is in protection mode the LED will show as red.
9. PROTECTION / POWER INDICATOR
When the amplifier is operating correctly the LED will show as green.
2
3
BOOST
PHASE
2
3
4
REFUERZO
FASE
LPF
PHASE
0 dB 12
0°
180° 30 Hz 150
FASE
LPF
0°
180° 30 Hz 150
FUSE
FUSIBLE
+12V
FUSE
FUSIBLE
+12V
8
4
5
LPF
LEVEL
5
LPF
NIVEL
LEVEL
MIN
MAX
NIVEL
+
MIN
MAX
L
L
-
PRO
POW
ENTRADA DE ALTA
PROTECCIÓN /
+
ENCENDIDO
L
-
PRO
HIGH INPUT
POW
ENTRADA DE ALTA
PROTECCIÓN /
ENCENDIDO
8
9
9
6
6
L
R
+
R
R
-
HIGH INPUT
+
R
-
10
10
11
11
6