DSC 2550 Manual de preguntas frecuentes - Página 12

Navegue en línea o descargue pdf Manual de preguntas frecuentes para Sistema de seguridad DSC 2550. DSC 2550 18 páginas.

ALARM TEST

∗

Enter [

][6][Master Code][8] for a 2 second test of the keypad lights, keypad

sounder and alarm bells.

ENTERING ACCESS CODES SUMMARY:

∗

[

][5][Master Code]...

[1 to 8] [4 digits] Programs first group of 8 codes

[9] [1 to 8] [4 digits] Programs second group of 8 codes

[9] Returns to first group of 8 codes

[#] exits to the Ready mode

USER FUNCTIONS COMMAND SUMMARY:

∗

[

][6][Master Code]...

[4] Quick-Arm Enable/Disable

[6] Door Chime Enable/Disable

[8] Bell Test Function

KEYPAD ZONES

There are three zones which can be activated from the keypad. These zones

may or may not be active on your keypads depending on how your installer has

programmed them.

[F] Key: Keypad FIRE zone. Pressing this key for 2 seconds will activate the

keypad fire zone and the bell/siren output will pulse ON and OFF.

This zone is annunciated by the "Fire" light on the keypad.

[A] Key: Keypad AUXILIARY zone. Pressing this key for 2 seconds will

produce a series of beeps on the keypad along with the

transmission. To confirm transmission, the keypad sounder will

beep 6 times.

[P] Key: Keypad PANIC zone. Depending on how your installer programs

the panel, pressing this key for 2 seconds may produce a

completely silent alarm or an audible alarm along with the

transmission. If programmed as audible, the alarm bell will ring.

MAINTENANCE

With normal use, the system requires minimum maintenance. The following

should be observed:

1. Do not wash the keypad with a wet cloth. Light dusting with a barely damp

cloth should remove normal accumulations of dust.

2. The battery/bell test is designed to determine battery condition, however it is

recommended that the stand-by battery be replaced every three years.

3. For other system devices such as smoke detectors, passive infrared,

ultrasonic or microwave motion detectors or glassbreak detectors, consult

the respective manufacturer's literature for testing and maintenance.