DSC PDigital Security PC1565 Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Sistema de seguridad DSC PDigital Security PC1565. DSC PDigital Security PC1565 11 páginas.
Imprimir página
PC1555RKZ LED Keypad
System Light (PC1555RKZOnly):
If the System light is ON, one or more of these conditions
could be present on the system:
System Busy
System Troubles (see 'Viewing Trouble Conditions' on page 11).
Alarm Memory (see 'Disarming the System' on page 6).
Zone Bypassing (see 'Zone Bypassing' on page 11).
Programming
The System light will flash when you are
programming access codes, or performing other
programming functions. If someone is programming at
another keypad, the System light will turn ON to indicate that
the system is busy.
NOTE: If you have a PC1555RKZ keypad, the System
light acts as a Trouble, Memory, Programming and
Bypass indicator. Unlike the other keypads, these
conditions will only be represented by the System light.
Please keep this in mind when reading other functions in
this manual.
Emergency Keys (PC1555RKZ)
Press the [F]* key for 2 seconds to send a FIRE
transmission.
Press the [A]* key for 2 seconds to send an AUXILIARY
transmission.
Press the [P]* key for 2 seconds to send a PANIC
transmission.
The PC5516Z and PC5532Z Keypads
are available for applications with more
than 8 zones. The functions explained in
this manual are the same for all three LED
keypad types.
8
PC5508Z LED Keypad
Memory Light / Message
Upon disarming, if an alarm has occurred while the
system was armed, the Memory light will turn ON (see
"Disarming the System" on page 6).
Bypass Light / Message
If the Bypass light is ON, one or more zones are
bypassed (see "Zone Bypassing" on page 11).
Fire Light / Message
If the Fire light is ON, a fire alarm has occurred (see
"Fire Alarm Operation" on page 14).
Program Light / Message
The Program light will flash when you are
programming access codes, or performing other
programming functions. If someone is programming
at another keypad, the Program light will turn ON to
y.
indicate that the system is bus
PC5516Z LED Keypad
PC5532Z LED Keypad
LCD5501Z Fixed Message Keypad
The Liquid Crystal Display (LCD) displays prompts and
system information on two 16 character lines.
If "< >" appears, more information can be accessed by
using the arrow (< >) keys. Press [<] to see the previous
function or item of information. Press [>] to advance the
display to next function or item of information.
Press the keys on the number pad as prompted by the
LCD display to view alarms or troubles, to arm and disarm
the system and to bypass zones.
To exit a function and return to the Ready state, press [#]. To
select a function press [ ].
Display Lights (All Keypads)
Ready Light
If the Ready light is ON, the system is ready for arming.
The system cannot be armed unless the Ready light is
ON (see 'Arming the System' on page 4).
Armed Light
If the Armed light is ON, the system has been armed
successfully.
Trouble or System Light
If the Trouble light is ON, see "Viewing Trouble
Conditions" on page 11.
IMPORTANT NOTE: Test system weekly
and have any system trouble conditions
corrected by your alarm installer.
LCD5500Z Keypad
Emergency Keys
Press both
* keys for 2 seconds to send a FIRE
transmission.
Press both
* keys for 2 seconds to send an
AUXILIARY transmission.
Press both
* keys for 2 seconds to send a PANIC
transmission.
* IMPORTANT NOTE (All Keypads):
The Fire,
Auxiliary and Panic keys will NOT function unless
programmed by the installer. If these keys are in
service and the installer has enabled audible
feedback, holding down the key for two seconds
will cause the keypad sounder to beep indicating
that the input has been accepted and transmission
is underway. The [A] and
keys are programmed
to be used for non-medical emergencies only in
the United States, as per UL requirements.
9