DSC PowerSeries LCD5511 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Sistema de seguridad DSC PowerSeries LCD5511. DSC PowerSeries LCD5511 20 páginas. Dsc lcd5511 keypad instruction manual
También para DSC PowerSeries LCD5511: Manual de instrucciones (12 páginas), Instrucciones de instalación (4 páginas), Instrucciones de instalación (4 páginas), Instrucciones de instalación (4 páginas), Utilizando (2 páginas)

Bypassing Zones with a PK5508/PK5516/PK5501/RFK5508/RFK5516/RFK5501

Start with disarming the system

1. Press

, then your [access code] (if required).

2. Enter the two-digit number of the zone(s) to be bypassed (01-32). On PK5508/PK5516/

RFK5508/RFK5516 keypads, the zone light will turn on to indicate that the zone is

bypassed.

3. To unbypass a zone, enter the two-digit number of the zone (01-32). On PK5508/PK5516/

RFK5508/RFK5516 keypads, the zone light will turn off to indicate that the zone is not

bypassed.

4. To exit bypassing mode and return to the Ready state, press

Activating All Bypassed Zones

To activate all bypassed zones:

1. Press

, then your [access code] (if necessary).

2. Press

3. To exit bypassing mode and return to the Ready state, press

Recalling Bypassed Zones

To recall the last set of bypassed zones:

1. Press

, then your [access code] (if necessary).

2. Press

3. To exit bypassing mode and return to the Ready state, press

Bypass Groups

A Bypass Group is a selection of zones programmed into the system. If you bypass a group of zones

on a regular basis, you can program them into the Bypass Group, so that you do not have to bypass

each zone individually every time. One Bypass Group can be programmed on each partition.

To program a Bypass Group:

1. Press

, then your [access code] (if necessary).

2. Enter the two-digit numbers (01-32) of the zones to be included in the Bypass Group. On

PK5500/RFK5500 keypads, you can also use the

included in the bypass group, and then press

3. To save the selected zone into the group, press

4. To exit bypassing mode and return to the Ready state, press

To select a Bypass Group when arming the system:

1. Press

, then your [access code] (if necessary).

2. Press

. The next time the system is armed, the zones in this group will be bypassed.

3. To exit bypassing mode and return to the Ready state, press

NOTE: Bypass Groups are only recalled if the system is armed/disarmed after programming the

bypass group.

keys to find the zone to be

to select the zone.