DAITEM SH601AU Manual de instalación - Página 8

Navegue en línea o descargue pdf Manual de instalación para Sistema de seguridad DAITEM SH601AU. DAITEM SH601AU 20 páginas. Alarm pendant

4.2 Programming for use with the dialler

IMPORTANT: the pendant cannot be recognised directly by a dialler alone SH511AX, SH512AX, SH513AX and SH514AX.

The pendant is only programmed

to operate with a dialler when

there is no alarm control panel in

the system.

1. To perform the pendant

programming operation, the

dialler must be in installation

mode. If it is not, enter:

master code

then

installer code

ADVICE: before doing anything, study

the step 2 programming sequence.

Check the programming LED making

sure to press the push-button for the

required amount of time.

2. Perform the next programming step:

LED ON

LED OFF

después

2. Press and hold the pendant

1. Press

then #

push-button until the dialler

on the dialler

responds.

keypad

IMPORTANT: the dialler indicates a programming error by issuing 3 short

beeps. When this happens, perform programming again from the start.

2 s.

10 s max.

3. The dialler issues

"beep,

command X"

a voice message

to confirm

pendant

programming.