Daitron MFS50-12 Manual de instrucciones

Navegue en línea o descargue pdf Manual de instrucciones para Fuente de alimentación Daitron MFS50-12. Daitron MFS50-12 3 páginas. Mfs50 series

Imprimir página

Prior to Use

・ Please read this instruction manual carefully before using the product.

・ Be sure to use the product as directed in these precautions.

Warning

・ Detach neither remodeling nor the cover of the product.

This product contains components with high voltage or high temperature.

・ To avoid electric shock or burns, do not touch these components.

・ Keep your face and hands away from the activated product.

Unexpected trouble may occur, causing injury.

Caution

・ This power supply unit is intended to be used with general or commonly used

electronic equipment.

・ Do not operate this product in over-charged current or short-circuit

conditions for more than 10 sec.

Such conditions may cause damage and electrical insulation failures.

・ Avoid actions causing shock such as dropping to this product.

1．Terminal description

・ Before connecting the input and the output , make sure that the input is shut off.

・ Please use less than 5A for each output terminal pin.

・ Connect the FG terminal with the earth terminal of the device or the equipment.

・ Please use applicable connectors for each pin.

Also please use suitable crump tool recommended by manufacturer

・ Wire for the output and the input separately. The noise-proof improves.

Pin #

CN101

CN501

CN502

Terminal description

Input Terminal (L)

Input Terminal (N)

Frame Ground

Output Terminal (+)

Output Terminal (-)

Remote Control Terminal (+)

-R

Remote Control Terminal (-)

Output Voltage Adjustment Potentiometer

MFS50 Series

Misuse may cause electric shock, fire or failure.

Housing

VHR-5N

(Manufacturer:

JST)

VHR-

4N(Manufacturer:

JST)

XHP-2

(Manufacturer:

JST)

Instruction Manual

Connector

BVH-21T-P1.1

SVH-21T-P1.1

BXH-001T-P0.6

SXH-001T-P0.6