AirTies Air 4920 Manual de autoinstalación - Página 3

Navegue en línea o descargue pdf Manual de autoinstalación para Enrutador de red AirTies Air 4920. AirTies Air 4920 3 páginas. Home wi-fi mesh kit
También para AirTies Air 4920: Manual de instalación rápida (9 páginas), Manual de instalación rápida (12 páginas), Instalación rápida Quide (8 páginas), Manual de instalación (2 páginas)

Imprimir página

AirTies Air 4920 Manual de autoinstalación

Having trouble?

• If your Wi-Fi Extender displays a red light, it likely has a bad connection or is too far from your existing Wi-Fi

Gateway. Move the Extender closer to your Wi-Fi Gateway. This provides a stronger signal.

• If your Wi-Fi Extender has both LEDs flashing green every 5 seconds, it is ready to be paired. Place your Extender

close to your Gateway and press the WPS button on the front of your Wi-Fi Gateway, then the WPS button on the

Extender. The 5GHz and 2.4GHz lights will flash and then turn solid green when they are successfully paired. You can

then move your Extender to your final location.

• Pressing the reset button on the back of the Extender with a paper clip will restore factory settings. Your Extender

will need to be re-paired with your Wi-Fi Gateway by following steps 1-3.

• When successfully paired, the 5GHz light will blink briefly every 5 seconds to indicate a successful pair. The 2.4GHz

light will remain solid green. (

• Visit att.com/wifiextender for additional Extender support.

• Sources for a weak Wi-Fi signal include microwave ovens, cordless phones and other wireless devices such as

wireless speakers, baby monitors and garage door openers which can cause Wi-Fi interference.

If you are experiencing service issues,

check the following:

Your Internet Service needs to be active.

You must have working AT&T Internet service

for your Extender to work correctly.

Check your connections.

Check all cables and cords to ensure they

are connected properly and securely.

Additional information

Test your Internet connection speed

Our speed test takes less than a minute to

perform two key measurements (Download

and Upload) to help you determine if

you should take steps to improve the

performance of your online experience.

Visit att.com/speedtest.

Manage your account:

Available 24/7, download the myATT app at

att.com/myattapp from your mobile device.

Repair center:

Phone: 800.246.8464

IPv6

AT&T supports IPv6 across our network,

equipment and devices. Visit att.com/ipv6

for more information.

Need more help?

Visit att.com/support

Call us at 800.288.2020 and ask for "technical support."

All other marks are the property of their respective owners.

)

Accessibility support:

• Alternate format guides:

- Braille or large print: call 800.288.2020 and request guide number

(ATT170820943-2)

- Accessible tagged PDF: visit att.com/userguides

• Telephone equipment for visual and/or hearing impaired:

- Phone: 877.902.6350

- TTY: 800.772.2889

• Repair Center:

- Phone: 800.246.8464

- TTY: 800.397.3172

• Device Compatibility Feature: Compatible with any

TTY/TDD devices with standard phone line

¿Hablas español?

Por favor visita att.com/uverseguias para ver la información en español.

También puedes ver la siguiente guía: (ATT170820943-2) (FTTP-GPON CSI

SP) para más detalles.

Power down, power up.

Unplug the power cord from the back of the

AT&T Wi-Fi Extender. Leave the Wi-Fi Extender

unplugged for 15 seconds and plug it back in.

You may need to wait up to three minutes for

your Wi-Fi Extender to completely reboot.