Anslut 013665 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Luz exterior Anslut 013665. Anslut 013665 6 páginas. Cord lamp led
También para Anslut 013665: Manual de instrucciones (20 páginas)

Imprimir página
EN

SAFETY INSTRUCTIONS

•
The product must be connected to an
earthed power point.
•
Keep power cords and extension cords
away from cutting tools, sharp objects
and other potential risks, such as wet
floors and solvents.
•
Do not touch the product, plug or power
cord with wet hands or other wet parts of
your body.
•
Do not use the product in wet rooms.
•
Check at regular intervals all electrical
connections and power cords for damage.
Rectify any faults before using the light.
Always have the wiring and connections
checked by an authorised electrician.
•
Check that the mains voltage corresponds
to the rated voltage on the type plate.
•
Do not use the product in an explosive
environment, e.g. near flammable liquids,
gas or dust. Do not use the product near
flammable materials.
•
Do not look directly into the light source.
•
Do not use the product if the glass front is
cracked or damaged. The product must be
discarded if the glass front is cracked or
damaged.
•
The light source is not replaceable.
The entire product must be replaced
if it stops working.
WARNING!
•
This product becomes very hot during use.
Risk of burns.
•
Keep combustible materials away from
the product.
•
Make sure there is enough ventilation to
prevent the product getting too hot.
6
SYMBOLS
The product must be
discarded if the glass front is
cracked or damaged.
Safety class II.
Approved as per applicable
directives.
Recycle discarded product as
electrical waste.

TECHNICAL DATA

Rated voltage
Output
Safety class
Luminous flux
Colour temperature
230 V ~ 50 Hz
5 W
II
350 lm
6500 K