Daitsu RTD-200-UT Manual de servicio - Página 10

Navegue en línea o descargue pdf Manual de servicio para Mando a distancia Daitsu RTD-200-UT. Daitsu RTD-200-UT 11 páginas. Wire remote control

Installation figure as following:

A: Turn a screwdriver at the concave on bottom panel of the wired controller to remove the

back cover.

B: When installing the wired controller cover, it is sure that there is a hole in the wall to

avoid the wired controller back cover being fixed directly to the wall which is not allowed for

the wire joint extrudes out of the back cover.

C: When installing the wired controller, adjust the bottom of the controller board to the back

cover which should be fixed first, then press the other end of the controller board.

Notes: The connecting wire should be a little longer as to take away the switch board and

controller easily for maintenance.