Foxfury Lighting Solutions 480-L06 Manual del producto - Página 5

Navegue en línea o descargue pdf Manual del producto para Faro Foxfury Lighting Solutions 480-L06. Foxfury Lighting Solutions 480-L06 12 páginas.

BATTERY

The Discover Series requires four (4) AA batteries. Acceptable battery
types include: Alkaline or rechargeable Alkaline, rechargeable NiMH or
LiFeS
(all are 1.2 to 1.6 volts each).
2
Do not leave batteries in the Battery Pack for periods longer than three
(3) months without use.
Be sure to check the Battery Pack every month for battery corrosion.
NOTE: Corrosion from leaking batteries is NOT covered by the warranty .
NOTE: Mixing of new and used, or different brand batteries is not
recommended as this could lead to leakage or explosion.

BATTERY INSTALLATION

1
1
1.
Open all six (6) of the Battery Pack Tabs.
Insert four (4) AA batteries. Reference the plus ( + ) and minus ( - ) symbols
2.
2
located on the inside of the Battery Pack for proper installation.

REASSEMBLING THE BATTERY PACK

1.
1
Once batteries are installed, test the light's performance by activating the
Power/Mode Switch located on the top of the light.
2.
2
Secure the Battery Pack Cover by snapping all six (6) Battery Pack Tabs.
A 'click' should be heard as the snaps are shut.
NOTE: Make sure the Battery Pack is properly closed to maintain a
water tight seal.
(WATCH THE VIDEO: FOXFURY .COM/VIDEOS)
2
5