DSC CLASSIC PC1555 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Control Panel DSC CLASSIC PC1555. DSC CLASSIC PC1555 11 páginas.

Imprimir página

Remember to record your new code(s) on the "System Information" page in this booklet.

Access Code Attributes

Additional programmable attributes, such as zone bypassing capability, can be activated or

deactivated for each access code. For more information regarding access code attributes, please

contact your installer.

Zone Bypassing

The zone bypassing function is used when access is needed to part of the protected area while the

system is armed. Zones which are temporarily out of service due to damaged wiring or contacts may

be bypassed to allow system arming until repairs can be made.

Bypassed zones will not cause an alarm. Zones cannot be bypassed once the system is armed.

Bypassed zones are automatically cancelled each time the system is disarmed and must be reapplied

before the next arming.

NOTE: For security reasons, your installer may program the system to prevent you from bypassing

certain zones.

Bypassing zones reduces your security protection. If you are bypassing a zone due to damaged wiring

or contacts, please call a service technician immediately so that the problem can be resolved and your

system returned to proper working order.

Do not unintentionally bypass zones when you arm your system.

To bypass zones from an LED keypad:

Start with the system in the Ready state. Enter [ ][1][Zone number(s) to be bypassed].

Enter the zone number(s) as a double digit from 01 to 08. As each zone is bypassed, the corresponding

zone light will turn ON. If a zone is bypassed by mistake, press that zone number again and the zone

light will turn OFF, indicating that the zone is not bypassed. Press [#] to return to the Ready state.

When the system is armed, the Bypass light will be ON if one or more zones are bypassed.

To bypass zones from an LCD keypad:

To bypass a zone, the system must be in the Ready state. The display will read...

Press the [ ] key to enter the functions menu. The display will read...

Enter Code to

Arm System

Press the [ ] key to enter the zone bypassing mode. The display will read...

Press (*) for<>

Zone Bypass

Use the arrow (< >) keys to find the zone to be bypassed and press the [ ] key to

select it. The display will read...

Zone Search < >

"B" will appear on the display to show that the zone is bypassed. To unbypass a

"Zone Name"

zone, enter the zone number; the "B" will disappear from the display to show that

Zone Search < >

the zone is no longer bypassed.

"Zone Name"

This display will be shown if a zone was open when you entered the bypassing

Zone Search < >

command. The open zone will be represented by "O". If you bypass the open zone,

"Zone Name"

the "O" will be replaced by a "B".

To exit the bypassing mode and return to the Ready state, press the [#] key.

Passkey Operation

Another way of bypassing while the system is armed is through the use of passkeys. The 1007AK

Programmable Passkey allows temporary access to protected premises for service and maintenance

personnel. The 1007AP Passkey Programmer allows Passkey to be programmed so that it will only

work on specified systems for a limited amount of time. The Passkey user simply plugs the key into the

button of the NMF-1008 keypad to bypass the system. When the passkey is plugged in, the keypad

If an access code already exists for the code number you have selected, it will be replaced by the

new code. Be sure to record your new code(s) on the "System Information" page in this book.

To erase a code:

Enter [ ][5][Master code][code number][ ]. To exit code programming, press [#]. The master code

cannot be erased.

Programming codes from an LCD Keypad:

Master Code

Press the [ ] key to enter the function list. Scroll (< >) to...

Press (*) for<>

Press [5] or [ ]. The display will read...

Access Codes

Enter Master

Enter your current Master Code. The display will read...

Access Code

"01P" represents the first access code. Use the arrow (< >) keys to scroll to "40P"

(*) to Edit < >

User Code

01P

and press the [ ] key to indicate that you wish to program the Master Code. The

display will read...

Enter New Code

Enter the new Master Code. The Master Code must be four digits unless otherwise

1234

< >

indicated by your installer. Enter digits 0 through 9 only. Once the new code is

entered, the keypad will beep 3 times and the display will read...

(*) to Edit < >

User Code

01P

Press [#] to exit the code programming function.

Be sure to record your new Master Code on the "System Information" page in this booklet. NOTE: We

recommend that the factory default Master Code [1234] not be used.

Additional Access Codes

To erase, add or change a user code, press [ ] to enter the functions list. Use the arrow (< >) keys to

scroll to the following message...

Press (*) for<>

Press [ ]. Display will read...

Access Codes

Enter the Master Code. Display will read...

Enter Master

Access Code

Use the scroll keys (< >) to find the access code – indicated by "01P" to "34P" or

[*] to Edit

"41P" to "42P" – you wish to add, change or delete. Press the [ ] key to select the

User Code

01P

code you wish to alter. The display will read...

To add or change a code, enter the new code. Access codes must be four digits

Enter New Code

unless otherwise indicated by your installer. Enter digits 0 through 9 only. To delete

1234

< >

an access code, enter [ ]. Once the 4 digit code or [ ] has been entered, the

keypad sounder will beep 3 times and the display will read...

The "P" means the code has been programmed. If there is no "P" then that code is

[*] to Edit

deleted. Press [#] to exit the code programming function. The Master Code cannot

User Code

01P

be erased.