Anslut 427-572 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Luz de inundación Anslut 427-572. Anslut 427-572 7 páginas. Led

Imprimir página
ENGLISH
Read the Operating Instructions carefully before use.
Save these instructions for future reference.
The product gets hot when in use. Do not touch hot parts – risk of burn injuries.
Do not use the product in explosive environments, for example, in the near vicinity of flammable
liquids, gas or dust. Do not use the product near flammable materials.
Do not look directly into the light source.
Do not use the product if the glass front is cracked or damaged.
Replace cracked glass fronts.
Only use bulbs that are approved for the rated output of the product.
The minimum distance between the floodlight and an illuminated object is 1 m.
Electrical safety
The product must be earthed.
A damaged power cord must be replaced by an authorised service centre, or qualified person, to
ensure safe use.
Regularly check all electrical connections and power cords for damage. Any faults should be
immediately rectified before using the product.
Keep power cords and extension cords away from cutting tools, sharp objects and other potential
risks, such as wet floors and solvents.
Check that the mains voltage corresponds to the rated voltage on the type plate. Always use a fuse
that has the correct amperage rating.
A damaged power cord must be replaced by an authorised service centre, or qualified person, to
ensure safe use.
Replace the glass front immediately if it gets damaged.
IMPORTANT: The product gets very hot when in use. – risk of burn injuries. Keep flammable
materials away from the product. Make sure there is enough ventilation to prevent the product
getting too hot.
Keep the power cord away from sharp edges. Always protect the plug and power point from rain
and moisture.
1.
Fit the floodlight on the stand. Align the holes in the bracket to the holes in the stand.
2.
Insert and tighten the angle adjuster screw.
3.
Change the angle of the floodlight by undoing the screw, adjusting the angle, and then retightening
the screw.
4.
Check that the floodlight is properly tightened and that the stand is correctly fitted and completely
stable.
ENGLISH

SAFETY INSTRUCTIONS

TECHNICAL DATA

Rated voltage
Output
Protection rating
Luminous flux
Colour temperature
Weight

OPERATION

230 V ~ 50 Hz
30 W
IP65
2160 lm
4000 K
4.8 kg
6