Anslut 427632 Manual de instrucciones - Página 16

Navegue en línea o descargue pdf Manual de instrucciones para Luz de inundación Anslut 427632. Anslut 427632 18 páginas.

INSTALLATION AND STANDARD WIRING INSTRUCTIONS

WARNING! Never attempt to remove the sensor casing, as this will damage the PIR sensor

and render the guarantee invalid.

CAUTION

• Do not mount the floodlight on a surface prone to vibrations.

• Mounting position: ideally, the floodlight should be mounted with the accompanying

wall bracket.

• The floodlight should only be mounted as shown in the figure. Do not mount it upside-down

or facing sideways, as the air valve must face downwards (Fig. 1).

• Servicing must only be carried out by a qualified electrician.

<3 m

45°

Hold the bracket against the wall and mark where the holes are to be drilled. Drill and plug

the wall at the marked positions. Screw the wall bracket to the wall using suitable screws

(neither screws nor plugs are supplied) (Fig. 2A).

Unscrew the junction box cover and remove the clamp and rubber seal.

Push the power cord (H05RN-F3G 1.0 mm², not included) into the junction box through

the conduit and rubber seal. Make sure that the conduit is tightly closed.

ASSEMBLY

35°