Foxpro HELLCAT TX433XL Manual de instrucciones - Página 16

Navegue en línea o descargue pdf Manual de instrucciones para Altavoces Foxpro HELLCAT TX433XL. Foxpro HELLCAT TX433XL 20 páginas.
También para Foxpro HELLCAT TX433XL: Manual de instrucciones (16 páginas)

Imprimir página

• Keep the transmitter a minimum of six inches away from your

body, gun barrel, and metal shooting sticks as these things can

detune the transmitter.

• Hold the transmitter vertically with the antenna pointing

skyward (reference image below):

Figure 3 Example of proper transmitter orientation

• Be aware that using the device remotely when you are near

power lines, cellular phone towers, and radar (such as near

airports or military installations) can create interference with

the transmitter signal.

• Try to elevate the caller off the ground by approximately three

feet. This can greatly maximize your overall range.

7. Product Care and Maintenance

Avoid exposure to all precipitation and moisture. Moisture can

potentially enter the unit or the battery compartment and cause

serious problems. Proper care should be taken to mitigate the

introduction of moisture into the machine and make sure that no

moisture is present during storage. Moisture can quickly lead to

corrosion, electrical shorts, and even rust—all of which can render the

unit damaged and out of warranty. This type of damage is preventable!

If you are operating in rainy, wet conditions, it is recommended that

you place the unit inside of a large plastic storage bag or use a

water/weatherproof deployment bag to keep water from getting to it.

When storing the unit for prolonged periods, be sure that you keep it in