DSC Power 832 Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Unidad de control DSC Power 832. DSC Power 832 11 páginas. Central station talk / listen module
También para DSC Power 832: Manual de instrucciones (18 páginas), Instrucciones de uso (2 páginas), Manual de instrucciones de instalación (12 páginas), Manual del usuario (20 páginas), Instrucciones de instalación (2 páginas), Instrucciones de instalación (2 páginas), Manual de instalación (17 páginas)

Door Chime Feature

The door chime feature is used, while the panel is disarmed, to provide a tone from the keypad each

time a door or window is opened or closed. The doors and windows which will provide this indication

are programmed by your installer.

To activate the door chime from an LED Keypad:

Enter [ ][4] to turn the door chime feature ON and OFF. When the command is entered, the keypad

buzzer will beep 3 times if the door chime feature is enabled and will sound one long beep if it is

disabled. Press [#] to return to the Ready state.

To activate the door chime from an LCD Keypad:

Start with the panel in the disarmed mode, press [ ] to enter the function list, then scroll to find...

Press [ ] or [4] to enable or disable the Door Chime feature. Press [#] to return to

Press (*) For <>

the Ready state.

Door Chime

Language Selection (LCD Keypads Only)

The displayed language of the keypad can be changed by pressing and holding both of the arrow (< >)

keys simultaneously. This will cause the keypad to enter the Language Selection mode. Scroll to the

desired language and press the [ ] key. This will select the new language and restart the keypad.

Alarm

On a fire alarm, the bell or siren will pulse ON and OFF. The transmission of the alarm to the monitoring

station is delayed for 30 seconds. If the alarm is not cleared within the 30 second delay, it will then be

transmitted to the monitoring station.

Silence

To silence the bell or siren, press the [#] key. If the alarm is silenced and the smoke detector is not

reset, the alarm will resound after 90 seconds.

Resetting Smoke Detectors

Once the smoke detector is reset, if it still detects smoke, the alarm sequence will resound as

described above. If there is no smoke, the system will return to normal.

To reset smoke detectors from an LED Keypad:

Press [ ][7][2].

___________________________________________

[F] FIRE __________________________________________

[A] AUXILIARY ____________________________________

[P] PANIC ________________________________________

The Exit Delay Time is ________ seconds.

The Entry Delay Time is ______ seconds.

For Service

Monitoring Station Information:

Account #: ___________________________________

Installer Information:

Company: ___________________________________

_____________________________________

Telephone #: _________________________________