Foxpro Patriot Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de caza Foxpro Patriot. Foxpro Patriot 17 páginas.

2-3 TX433 Requirements

The TX433 remote control operates on a single 9V battery (not included). It is recommended that you use a

high-quality lithium or alkaline battery for the best performance.

Installing a Battery in the TX433 Transmitter

Access the battery compartment by removing the battery compartment door from the back of

the TX433. The door slides down and off the remote.

Insert the 9V battery in the back of the remote.

Slide the battery compartment door back onto the remote.

Push and hold the power button on the TX433 for approximately 1-2 seconds to power it on. The

LCD will activate and display the primary screen.

The primary function of your Patriot game call is to produce sounds to attract wildlife. This section explains

how to turn on the Patriot and the TX433 and how to start playing sounds.

THE PATRIOT TRANSMITTER IS NOT INTENDED TO OPERATE THE CALLER AT DISTANCES

SHORTER THAN 1 METER (3 FEET). IF THE TRANSMITTER IS LOCATED TOO CLOSE TO THE

CALLER, PROPER OPERATION CANNOT BE ENSURED.

Turn on the Patriot by moving the power switch to the on position (to the right). When powered

on, the Patriot pilot light illuminates green, indicating that it is powered on. If the light does not

activate, replace your batteries and try again.

Turn on the Patriot horn speaker by moving the speaker switch to the right.

Turn on the TX433 transmitter by pushing and holding the power button for approximately 1-2

seconds.

Notice the black horizontal highlight bar on the TX433 display. The bar moves up and down the

screen as you use the "Scroll Up" or "Scroll Down" arrow buttons.

Move the highlight bar to one of the sound categories and push the "Select" button. Doing this

results in displaying all of the sounds in that particular category. To exit the current category,

push the "Back/Menu" button.

After moving the highlight bar to the sound you wish to play, push the "Select" button a single

time to begin playback. Your selected sound will begin playing at low volume.

To adjust the volume: Use the "Volume Up" button to raise the volume level to your desired

setting. Use the "Volume Down" button to decrease the volume level. The transmitter has 20

volume steps.

To silence the sound: Push the "Mute" button a single time. When muted, the mute status

indicator on the TX433 display shows an "M" and the current sound is silenced. Un-muting is

accomplished by pushing the "Mute" button a second time (the "M" will no longer be displayed

and the sound will resume playing).

To switch sounds: Use the scroll buttons to navigate to a different sound and push the "Select"

button. You can switch sounds while the Patriot is actively playing a sound or while muted.

10. To turn off the TX433: Push and hold the power button for approximately 1-2 seconds. Be aware

that turning off the remote control does not end sound playback on the Patriot. If you are

finished calling, use the "Mute" button to silence the Patriot prior to turning off the TX433.

11. To turn off the Patriot: Slide the power switch to the off position (to the left). The pilot LED will

extinguish.

IMPORTANT NOTE