DSE RE-TCC5E Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad DSE RE-TCC5E. DSE RE-TCC5E 2 páginas. Color wired cameras

Imprimir página

OWNER'S MANUAL

Product description

The camera RE-TCC5E camera has a resolution of 700 lines based chipset DSP-E SONY

EFFIOE and OSD menus designed to analogue CCTV applications requiring the highest video

quality.

Main features:

SONY SUPER HAD CCD 1/3 '' Resolution 650 TV lines Minimum Illumination 0.001

Lux in B / W

function day / night to night vision B / W and compatibility with IR illuminators

ADAPTIVE TONE REPRODUCTION - The ATR feature allows better color rendering in dim

shooting.

Horizontal Mirror function for

the image in the back shooting.

OSD (On Screen Display), programming via onscreen MENU controllable with buttons

remote control on the cable.

Titler for

Stamping number

camera

rear connections

Video OUT

BNC connector for video output

Terminal block for 12VDC power supply. Supplied with cable socket

DC 12V

for DC plug

5.5 mm

LED PL

Power LED

TP-CV

Selector - TP position not active

TERMINAL

NC NC TP + TP is not used in this

version.

BNC video output - Bottom right you connect a cable leading to monitors or management

devices typically using RG59 coaxial cable type and the like, and BNC connector.

DC12V - Connect 12VDC power supply by at least 1A with a 5.5 mm plug with a positive

central STABILIZED, such as RE-AL4S model, using this cable in the package (cable red + /

black cable -). Or connect directly to the positive and negative power supply terminal.

Switch TP / CV - Keep the switch CV- The TP position is not used at the time.

Terminal C / NC / TP + / TP - not enabled at the time

Side panel

whose control cable connects to the side grip on the camera.

overturning

the

through

the configuration menu on the camera screen. With the middle button you enter the camera setup

menu, with the other buttons you move between menu items.

thread for the bracket is available under the camera both above for ceiling mounting.

Power to the camera

On the back of the camera there is the terminal block for the power supply (POWER). Inside the

box we can find a cable to be connected to the terminal, this cable has the pin at the other end to

be connected to the power supply. We must connect a 12VDC power supply by at least 1A with a

5.5 mm plug. center-positive, as the RE-AL4S model.

Attention to use STABILIZED feeders that provide 12V in any load condition. The use of a

different supply voltage from 12VDC can generate video disorders and in the worst cases

damage the camera.

If you carried out a centralized power pay attention to too long power cables, which could

introduce excessive voltage drop. Beware too long power cables in the transport of

excessive voltage drop.

Connect the video

The video output is on the rear of the camera and has a BNC type connector. It must be

connected to the monitor or video management device. If the distance to be covered is a few

meters you can use any type of cable. But if you go over 10 meters we recommend using the

coaxial cable type RG59 or similar which also allows the wiring over a hundred meters.

Attach the lens

These cameras are supplied without lens so that you can equip with the lens more suited to the

size and to the ambient brightness. The attack to the target is C / CS type. The goal must be

purchased separately and is screwed on the front of the camera. If the lens is of the iris type

must be connected to the connector socket to the rear view camera. The camera is capable of

controlling autoiris Direct Drive goals. If you need to bring their own to the connector solder

these are the PIN to use:

DSE - ITALY - WWW.DSE.EU

Document: RE-TCC5E 1G1

RE-TCC5E Color Wired cameras

Input for autoiris lens - The camera is capable of controlling autoiris Direct Drive objectives

Side Door, OSD control buttons - buttons protected by the side cover are used to control

Fixing - The camera is provided without bracket which must be purchased separately. The

12VDC,

that could

Page: 1

to introduce