DSG Technology AA9604 Manual de instrucciones - Página 12

Navegue en línea o descargue pdf Manual de instrucciones para Buzón de voz DSG Technology AA9604. DSG Technology AA9604 20 páginas. Auto attendant

Chapter 3 Programming Procedures

3-1 Entering Programming Mode

Programming mode is initiated as soon as the password is entered. The factory

default password is [1][2][3][4]. To enter the programming mode, please follow

the steps below:

Dial either LINE1 or LINE2 or LINE3 or LINE4 of the system.

When you here the greeting, "Thank you for call.......", press the [#] button

followed by the four-digit password (default [1][2][3][4]), and now you are in

the programming mode.

When the system responds you with the message "Enter Three- digit

function code", press the three-digit function code to enter the function that

you want to edit.

After entering the function setting, you may use the following keys to edit each

function:

[1]: Modify this function setting.

[2]: Save current setting, and return to main menu.

[3]: Save current setting, and jump to previous function.

[4]: Save current setting, and jump to next function.

[#]: Finish setting operation, exit the programming mode, and hang up the phone.

[＊]: Cancel setting operation, and return to main menu.

[Other Keys]: Replay the function message.

After finish setting operation, user can press [3] jumping to previous

function, or press [4] jumping to next function, or press [2] jumping to main

menu and then press another three-digit function code to enter the function

that you want to edit. (Note: Only one administrator can enter programing

mode at the same time.)

This section describes all operations for announcements recording. The total

recording time for 24 different announcements (including Day, Noon, Night,

Department Directory, Special, the Second Language, Function 800-890 and

Function 900-970) is approximately 1636 minutes (greeting: 100 minutes; voice

mail: 1280 minutes; 64 entries of AA menu: 256 minutes), each 4 minutes. (Note:

You may use one of the lines to record greeting. When recording, calls will be

taken by the other line but will be answered by the default greeting and

announcement system in busy status.)