DSG Technology Blaze Series Manual de instalación rápida - Página 13

Navegue en línea o descargue pdf Manual de instalación rápida para Servidor DSG Technology Blaze Series. DSG Technology Blaze Series 20 páginas.

key.

Settings on IP Phones

1. Plug in the power cord of the IP phone and please DO NOT connect the IP phone to LAN.

2. After the system check, press and hold the middle

Input your password, if any. The default password is 1234.

3. You will see "EXT NUMBER" shown on the LCD screen. Press the

use the keypad to input the extension number assigned to the IP phone. Press the

to save.

4. Press the downward

button to start editing and use the keypad to input the IP address assigned to the IP phone. Press the

5. Follow the above procedures to assign the "GATEWAY IP" and "SUBNET MASK" to the IP phone

6. Keep pressing the downward

button to start editing and use the keypad to input the IP address of your Blaze/Savanna Server. Press

button and the LCD screen will display "IP ADDRESS." Press the

button to save.

button until the LCD displays "PBX SERVER IP." Press the

button for 3 seconds to enter the setup menu.

button to start editing and

button again