ATS ATS-FM-M Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida ATS ATS-FM-M. ATS ATS-FM-M 16 páginas.

6. General

Temperature: 0 to 60°C (32 to 140°F)

Pressure: Max. 6.0 bar (85 psi)

Weight: 140 g (5.38 oz)

Accuracy : +/- 5%

Connection: 1/2" BSP

Materials

Sensor Body: Glass Filled PPS

Turbine: PA composite Turbine holder Acetal Copolymer, TICONA M90

Turbine Shaft: Ceramic

O-Ring: EPDM Rubber

Control Unit Housing: ABS resin

7.0 Operation Guide

7.1 Install Batteries

Slide off the cover of the battery compartment and insert two (2) AA batteries.

Then slide the cover back.

7.2 Connecting Fitting

ATS-FM-44 connectors are 1/2" BSP.

7.3 Operating

T he ATS-FM-44 will automatically turn on when there is water flowing through the sensor.

It will automatically turn off after 10 seconds when there is no water flowing.

7.4 Display and Mode Selection

Press the "DISPLAY" button to turn on the Flow Meter LCD screen. Press the

"DISPLAY" button again to display the accumulated flow volume (flow totalization)

or real-time flow rate.

7.5 Reset

Press and hold the "RESET" button for four (4) seconds, to reset the total measured

volume to zero (0).

7.6 Low Battery Power Alert

When battery power is lower than normal working level, a buzzer will beep twice and

the battery symbol on the screen will blink to notify users to change the battery. Once

the batteries are replaced, the alert will be turned off. Data will be stored in memory and

restored when the user replaces the batteries.