DSPPA DMA6250U Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Amplificador DSPPA DMA6250U. DSPPA DMA6250U 14 páginas.
Imprimir página
Matters Needing Attention
In order to avoid any potential personal injury as well as loss or damages to equipment or property, please
DO follow the basic instructions as given below. Such instructions include with limitation to the following:
Power supply/power wire
• Please hold the plug other than the power wire when
trying to remove the plug from sockets. Pulling the
power wire may result in damages.
• Please do NOT place the power wire anywhere near
the heat source. Please do NOT bend or buckle the
power wire or place it where it may be stepped on or
may trip passer-by.
• This equipment is connected to the power grid
through the plus, so when any fault or danger occurs,
the user should remove the plug from the socket to
disconnect the equipment from power grid, therefore,
it is important to place the power socket where it is
easily accessible.
• When the power switch of this equipment is "OFF",
the equipment is not disconnected from the power
source; therefore, for purposes of safety, the user
should remove the plug from power socket when the
equipment is not in use.
Installation Location
• Please disconnect the equipment from power source
before relocation.
• In order to avoid deformation of the panels and
damages to components, please do NOT place the
equipment where there is excessive dust, vibration or
extreme cold or hot conditions.
• Please keep this equipment off water drops or splash
or vase filled with water or any other articles of
similar nature.
Connection
• Please disconnect the power supply when the
equipment is connected to any other equipment.
Please turn the volume down to the minimum level
before switching on or powering off the equipment.
• Symbols of
on any terminal in the equipment
indicate that such terminal is live and dangerous and
any connecting operation should be done by trained
personnel.
Please read the following carefully before any operation.
Warning
In case any abnormal condition is detected,
• If the power wire is worn or damaged, resulting in
sudden interrupt of sound or abnormal smell or smoke
during use, please cut off the power supply
immediately and have the equipment inspected by
professional personnel.
Matters needing attentions in operation
• Please do NOT put your finger in any gap or
opening of the equipment.
• Please keep any foreign matters (paper, plastic or
metal) from being inserted in any gap or opening of
the equipment. In such cases, please cut off the power
supply immediately.
• Please do NOT put any part of your body or any
heavy object on the equipment and please be careful
when operating any button or switch of the equipment
or when connecting the equipment.
Please do NOT disassemble the equipment
• Please do NOT remove the cover of the equipment;
otherwise you may get an electric shock.
• Please do NOT attempt to disassemble any
component
of
the
equipment
modifications in whatever manner. If any abnormal
phenomenon is observed, please stop using the
equipment immediately and have it inspected by
professional personnel.
Other Precautions
• Our company will be take responsibility for data loss
or damages resulting from improper user or
unauthorized modifications.
• All figures included in this Manual are for
description purposes and there may be slight
difference in your actual application. Please refer to
the actual product.
or
make
any