ATTACK PZO 150 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Calentador de agua ATTACK PZO 150. ATTACK PZO 150 12 páginas. Direct heated gas tanks for d.h.w

Imprimir página

WARNING FOR USER!

 When taking the storage tank over make sure whether the letter of guarantee is confirmed

properly.

 Reclaim defects immediately otherwise you lose your right for guarantee. Check whether

the equipment was not damaged during transport and if it was, claim the guarantee at the

transporter.

 Reclamation of the completeness of the delivery is carried out in compliance with

Commercial Code and Civil Code at the deliverer.

 Assembly of the product can be done only by a qualified worker or organization with a valid

certificate. Repairs of the storage tanks can be performed only by service organizations

included in the list. Unqualified intervention into the storage tank can cause losing the right

for a guarantee repair free of charge!

INSTALLATION AND ADJUSTMENT OF GAS VALVE

Only for qualified workers!

Adjustment of the outlet pressure

All the adjustments must be done according to technical

parameters of the appliance. Inlet and outlet pressure are

checked by A and B outlets.

Maximum pressure: Set up the control button to maximum

level of 7, by C screw set up pressure of 10 mbar.

Setting up gas flow to ignition burner

By gradual screwing D screw the flow decreases, by

releasing it increases.

If you want to put gas flow adjustment to ignition burner out

of operation, screw the D screw up to stop.

WARNING:

After finishing all the activities it is necessary to check

tightness of gas fitting and verify whether the appliance is

working.

BOILER ACCESSORIES, DOCUMENTATION

 A part of the gas storage tank is a safety valve (0,6 mbar)

and draught breaker

 Instruction for use

Because of permanent development of products we reserve the right to change

technical data.

setting up

the outlet

the output

of main burner

of pilot-burner

measuring

outlet gas

pressure

measuring

inlet gas

pressure