DSPPA MP 200P II Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Amplificador DSPPA MP 200P II. DSPPA MP 200P II 6 páginas. P.a. series mixing amplifier

PRECAUTION OF INSTALLATION

Do not block ventilation holes.

2. The amplifier should not be placed in any of the areas:

1) with poor ventilation;

2) exposed to direct sunlight;

3) with high ambient temperature or adjacent to heat-generating equipment;

4) with high humidity or heavy dust;

5) susceptible to vibration.

3. Make sure the power outlet conforms to the plug of the unit.

4. Do not use this unit if the electrical power cord is frayed or broken.

5. Always operate the unit with the ground wire

6. If a short alarm rings after turning on power and inputting signals, there must be an

output short circuit fault. In such case, power should be cut off immediately. Do not turn

on the power until the fault is removed.