DSPPA DSP403N Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Altavoces DSPPA DSP403N. DSPPA DSP403N 4 páginas. Network indoor column speaker
También para DSPPA DSP403N: Manual del usuario (7 páginas)

Imprimir página

Installation (Take DSP203N for an Example)

① Assemble the bracket into two parts, A and B.

② Install 3 expansion screws in an appropriate position for installation, and fix A on the expansion screws

with nuts. (Please pay attention to the installation height! It is recommended that the height of the speaker

be 1.8m to 2m high from the ground.)

③ Attach B to the rear panel of the speaker with screws.

④ Connect B attached to the speaker to A fixed on the wall, and tighten the screw to fix it.

⑤ Connect the sub speaker, network cable, power cord, etc. as needed.

⑥ Finally, adjust the angle of the speaker, check whether the speaker is installed firmly, and complete the

installation.

[email protected]

www.dsppatech.com

The specifications will be subject to change without prior notice.