DSPPA CM10 Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Micrófono DSPPA CM10. DSPPA CM10 3 páginas. Paging microphone



Plug & play function



Function with output voltage select



Turn on & off chime function



Adjustable chime volume

Front Panel

1. Chime 1 with note1-3-5- і

3. MIC on indicator

5. MIC off key

Back Panel

7. 220V power cord

9. Power switch

11. MIC volume knob

13. Output port

3 4

2. Chime 2 with note і-5-3-1

4. Power on indicator

6. MIC

8. Power fuse

10. Chime volume knob

12. Used to select the output

level switch

OPERATION

1．Link output port on unit's back panel with line input port on Pre

amplifier or power amplifier. Then select the microphone and the

bell of the output voltage, provide two voltage options: 600mV

and 20mV.

600mV for the microphone connected to the amplifier's line input.

20mV for the microphone connected to the amplifier's MIC input.

2．Connect AC220V power supply, then switch on power button on

back panel. Power indicator will be on in red.

3．Press the key chime 1, chime rings with note 1-3-5- і and MIC

indicator is on in yellow. MIC is in 'turn-on' status.

4．Press the key chime 2, chime rings with note і-5-3-1 and MIC

indicator is off. MIC is in 'turn-off' status.

5. Press the MIC off key, MIC indicator is off and MIC is in 'turn-off'

status.

6. Chime volume and MIC volume can be adjusted through the knob

9 and 10 on back panel. The volume increase when clockwise

turns the knob.

7. The microphone will automatically turn off, if no input signal to

or without any action on its within 10 minutes.