DSPPA D6573 Manual - Página 3

Navegue en línea o descargue pdf Manual para Equipos de grabación DSPPA D6573. DSPPA D6573 4 páginas. Digital feedback suppressor

from 0 to 9 by turning the encoder.

(3) "CH:" Left/right channel parameter adjustment activation menu, when "CH:L" is selected, adjustment to

left channel parameters is activated; when "CH:R" is selected, adjustment to right channel parameters

is activated; when "CH:LR" is selected, adjustment to parameters of both left and right channels is

activated.

(4) When "BYP" is shown, all feedback suppression filters of the current channel are bypassed. When "ACT"

is shown, the settings on the filter is valid and input signals are processed by the feedback suppression

filter.

(5) "FILT:", when prompt ":" changes to "->", the user can select any filter marked 1 to 12 by turning the

encoder.

(6) "：SING", when prompt ":" changes to "->", the user can press PUSH button to enter the display menu of

current filter and Q value. In SING mode, the user can adjust the frequency and Q value, while in

AUTO mode, the frequency and Q value will be simply displayed but can not be edited.

(7) If "SV" (indicator of parameter memory change) is shown, it means that the parameter has been

modified. After the user pressed the "STORE" button, "SV" changes to "SC", reminding the user

whether to remember the parameter, when the user presses the "STORE" button again, "SC"

disappears, which means that the new parameter has been recorded in the current channel.

(8) ": SET", when prompt ":" changes to "->", the user can press PUSH button to enter SING mode filter

setting menu: in the first step, the user should set up the quantity of SING filters and then press PUSH

button to choose if the SING filter parameters are to be reset. The user can press PUSH button again

to complete SING filter configuration.

Functional Keys and Encoder:

(1) PARAM/PUSH encoder with switches, allows adjustment to a large variety of parameters and the user

can enter the menu by press the PUSH button.

(2) FILTER SEL (Program/filter selecting button), the user may select up to 12 filters or 10 programs. When

"P->" is displayed, the user may select desired programs; when pressing this button once, "FILTER->" will

be displayed on the LCD, and at such time, the user may select desired filters. When pressing the button

once again, "P->" will be displayed and the user may select desired programs.

(3) FILTER MODE (Filter mode selecting button). When this button is pressed, the user can select the

operating mode of filter with the encoder. Two modes available: "SING" (single-point mode) and "AUTO"

(automatic mode). In addition, when the user presses down buttons FILTER MODE and FILTER SEL at the

same time, he/she can enter the auxiliary parameter configuration menu (NOISE GATE, HPF, LPF, Q, LED

DISPLAY, SENSITIVE).

(4) CHL, (5) CHR Left/right channel parameter adjustment activation button, which may be used to modify

parameters of the left and right channels. If the user wishes to modify parameters of both the left and

right channels, he/she should press buttons CHL and CHR at the same time. In addition, when the user

modifies any of the two channels and then switches to parallel mode, the parameters of one channel will

www.dsppacs.com

The specifications will be subject to change without prior notice.