3One data 7304 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Módem 3One data 7304. 3One data 7304 11 páginas. V.35 optic fiber modem
También para 3One data 7304: Manual del usuario (11 páginas)

Imprimir página

All manuals and user guides at all-guides.com

Local main timing (S5.1=ON, S5.2=ON): the sending timing is of local crystal OSC, and

the received data, after buffering, is synchronized with local timing.

5.3.2

5.3.2 Phase

5.3.2

Phase

Phase selection

Phase

selection

S5.4 is used for the receiving phase selection of V.35 interface.

5.3.3

Settings

Settings of of of of loopback

Settings

loopback

5.3.3 Settings

5.3.3

loopback test

S5.5～S5.8 of coded switch S5 are used for setting the loopback test and pseudo-random

code test.

S5.5 is local loopback control （LLOOP） and optic interface is directly looped back to

V.35 interface. "OFF" indicates normal operation; "ON" indicates local loopback test.

The default is "OFF". It is used for testing whether local device is in normal operation.

V.3 5

S5.6: local digital loopback control (DLOOP). "OFF" indicates normal operation; "ON"

indicates local digital loopback. The default is "OFF". With a loopback from local V.35

interface to E1 optic interface, it is used for testing whether the remote device and E1

optic line are in normal operation.

S5.7:"OFF"indicates normal operation ； "ON"indicates command remote loopback. The

default is "OFF". As this command must be sent through E1 optic line to remote end for

validness, it will become invalid at the following two cases: ① the remote end is not

V.35 Fiber Modem device; ② V.35 Fiber Modem is working at a non-framing status, at

this moment all time slots of E1 are used for transmitting the data from V.35 interface at

a rate of 2048Kbps. Through a transmission of loopback command from local device to

remote device, the command remote loopback is achieved.

V.3 5

S5.8: Pseudo-random code test control (PATT). "OFF" indicates normal operation; "ON"

indicates pseudo-random sequence test. The default is "OFF". It generates a

pseudo-random sequence code to be transmitted to V.35 optic line output terminal and

tests whether V.35 optic line input signal is in compliance with this sequence standard,

so as to judge whether the device and line transmission have an error code.

test

and

pseudo-random

test and

and pseudo-random

pseudo-random code

Optical

Fiber Modem V3 5

Interface

Local

Loopback

Schematic

Local

Local Loopback

Loopback Schematic

Schematic

V.3 5

Fiber Modem V3 5

Local

Digital

Loopback

Local

Local Digital

Digital Loopback

Loopback

Fiber Modem V3 5

Fiber Link

Local

Remote

Loopback

Remote

Remote Loopback

Loopback

Page 9 of 11

MODEL7304 User Manual

code

test

code test

test

Optical

Interface

V.3 5

Fiber Modem V3 5

R e m o te