Atten AT858D+ Manual

Navegue en línea o descargue pdf Manual para Estaciones de reprocesado Atten AT858D+. Atten AT858D+ 4 páginas. Hot air rework station

Imprimir página

AT858D HOT AIR REWORK STATION MANUAL

Introduction

Closed-loop sensors

Zero-crossing triggering temperature control of microcomputer

LED display

high power

rapid rise of temperature

Stable temperature

The amount of air flow can be modulated; large and soft air flow; it is convenient to

modulatetemperature; it is suitable for many purposes

There is a conductive switch on the handle; only if you hold the handle, the system can enter the

working mode rapidly; while the handle is put on the shelf, it will enter the waiting state; easy to

operate.

There is no automatic cooling function, which can extend the lifespan of the heating element and

protect the hot air rework station.

Plastic shell; cabinet; good-looking; it occupies little space.

Technical Parameters

Model

voltage

Power consumption

Type of air pump

Gas flow

Temperature range

Length of handle(including the wire)

Size

Weight

noise

Display

Warning

Before using the hot air rework station, you must abide by the following measures in order not to get an

electric shock, result in damages to people or result in fire, etc.

- In order to secure the safety of people, you must use the parts or accessories that the factory of

origin certificates or recommends; or it will lead to serious aftermaths.

- This rework station must be repaired by qulified technicians or the appointed person by us.

- Be careful, for it is operated at a high temperature. Don't use it near flammable and explosivegas

and objects, for the tip and the air from it are steaming-hot, which can burn people. Don't touch

the heating element or spray the hot air against people.

- When the hot air rework station starts to work, don't leave from your post.

- Keep away from children.

- When it starts to work, don't install the nozzle until the heating pipe and nozzle are cooled.

- Please keep the draughts of input and output expedite; there should be no block.

- After using it, remember to cool the machine. You should put the handle on the shelf. When the

machine is in the waiting state, you can make the power off.

- If you don't use it for a long time, you should put the connector plug off.

AT858D+

AC220V/50Hz

700W

Gentle wind of brushless fan

120L/min(MAX)

100-450℃

1.2CM

151(L)*100(W)*153(H)mm

About 1.5KG

<40dB

LED(DIGITAL)(RESOLUTION,1)